🚙 Daystar Jeep XJ Cherokee Rear Polyurethane Spring Shackle Bushings for Comanche and Cherokee 1984-2001 2/4WD, KJ02008BK, Made in USA, Black Review

Very good replacement for my worn bushings. Seems to be of good quality but I have yet to test them on the track. Installation was great, removing the old bushings was the hardest part, but the saw and air hammer did the job.

First time using non-rubber bushings great, only issue is I didn't want to use clevis bushings as they were too big and could only replace leaves. Maybe just a broken box? But otherwise easy to assemble, great ride

didn't notice that the bushings are of different lengths. So make sure the correct jack is in the correct jack. I tried tightening the leaf spring and couldn't find any reason why I put the wrong bushing. So learn from your mistakes.

Starting to creak even after they've been heavily lubed I don't mind, although letting the bushings creak is better than wearing them out in a year or two . Also, the two-part design saves time, if you ever want to change and update the back of the sheet, unlike the originals, they pop out right away.

Bushings look high quality. They are made right here in Phoenix, Arizona and come with some assembly lube presumably to eliminate the squeak. The metal bushings are drilled to allow the bushings to be lubricated with a grease fitting screw.

Compared to OEM designs with metal and rubber boots, it is convenient to work with. Went to OME leaf packs for my 98 XJ, no pressure but still very tight. Also think it's awesome the inserts have oiler holes on the aftermarket mounts. They cannot bend like worn rubber and squeak easily. but they are superior in every other way.