Review on 🔪 Enhance Your Precision with TSPROF Profile K03 Pro Hunter Sharpening Set – Black/Silver by Agata Strzalek ᠌

So, the problem, the only one for today for this wonderful sharpener, I have outlined above. And after thinking carefully for a couple of days, I found a way for myself that I share. In principle, everything can be seen in the photo. In standard fixtures, you can clamp pieces of iron up to 25 mm wide. Anything wider requires a separate clamp. A primitive clamp is fine. The sharpening angle can be set by the “poke” method, by eye. Attaching a chisel tightly with a saw cut to the plane. At the back, in the grooves, to get the parallelism of the stops, I inserted a piece of steel strip from Leroy. 20 mm. It sits perfectly tight there in width, making the stops parallel. I polished it for beauty. Just don't sand the edges. Otherwise, it will no longer fit tightly and will fall out. The parallelism of the chisel on the table is set along the existing lines. We hold this entire structure by a chisel and make reciprocating movements on sandpaper on a plane, glass or stone slab. I use a granite slab for lapping 40x40 cm water grindstones.