Header banner
Revain logoHome Page
Owen Phi photo
1 Level
749 Review
76 Karma

Review on πŸ‹οΈ 1Kg High-Definition Resistance Sculpture by Owen Phi

Revainrating 5 out of 5

excellent resin with high detail

This resin is listed for DLP/LCD printers but I am currently using it on a SLA printer. The resin is more fluid than standard SLA resins and you will need to adjust the laser power accordingly. I also use the FEP system and not the PDMS based system. production work. This enables very good detail printing. Every model I've used has very fine/slight detail that would be lost at the small scale I print with other resins. It cleans well with isopropyl alcohol or denatured alcohol, then quickly rinses off with dish soap at dawn. and warm water. Post cure is fast and requires good sanding and painting. Few cons: It stinks more than other resins I usually use, but not much. More brittle than other resins, but again not by much.

Pros
  • LOW SHRINK This Siraya Tech 3D printing resin shrinks during curing, giving the printed model a smooth surface and high resolution, and is required for many traditional manufacturing processes.
Cons
  • There are other interesting options.