Review on 🔗 Set of 2 Trunk Cargo Hooks Compatible with Honda Accord 2008-2021, Civic 2010-2021, Acura TSX 2009-2014, ILX 2013-2021, TLX 2015-2021 by Doug Bunkers

I didn't hit 3 pounds of torque and one already snapped. It's holding up, but the crack makes it look awful for anyone to see. No, you do not need a riveting tool. You have two options for installing the mount: use the large washer and thread it over the hole by hand if you have little fingers, or use a 10mm wrench to remove the washer and 10mm wrench hold in place and use 10mm. a millimeter wrench to fix it by tightening it with a 10mm socket, while the weight hook is in a 10mm wrench into which a screw is inserted. I hand tightened the driver's side and attached the passenger's side using the rivet method. The rivet hole on the driver's side went to the side, which I didn't like. I took it out and put another 6mm rivet back in and it came out. The only other method was using hands. They should add it to their instructions as another installation method. Be careful, it's pretty sharp. Look at the photos.