Authentic Tappan 5303935066 Igniter OEM Part: Trustworthy Original Equipment Manufacturer Product Review

I last ordered this in January 2019 and now I'm ordering it again hoping it will be here before Christmas. It was very easy to install and fix the problem. Considering the price, less than $10 a year in installments isn't bad, but it's annoying to have to deal with yet another unexpectedly non-working oven, this time just before the holidays. Looks like gingerbread houses aren't on our list of holiday entertainment. :/ Luckily we have a separate stove which is fine and a gas BBQ so it doesn't…

Oven went from 5 minutes to 25 seconds - works great. all the details and speckled finish on the igniter itself. The only difference is that the original part's pins have been connected to the pins of other components, so you really have to cut the pins off the original parts and use wire nuts. Do not twist the wires together before using the provided ceramic nuts. Lay the two wires up, fresh and untwisted, and let the little wire nut twist them together. The instructions say so, but below the…

I change the ignition first if the stove burner burns longer than usual or if there is a smell of gas when it is on and the burner lights. Easy to replace, usually from the oven with a Phillips head screwdriver (sometimes a full set of screws, use an electric drill or a screwdriver with a Phillips head bit), cut and strip the old ignition wires leaving enough wire (positive) remains to attach. new igniter (there are two wires, polarity doesn't matter) and with ceramic nuts attach the new…

When this first arrived I thought it came without ceramic wire connectors which others have complained about. The package came in a little box with a detonator, and the box was in one of those big white Revain bubble wraps. Luckily I didn't throw the envelope away because I finally noticed the nuts were inside, separate from the box! So if you can't find yours, check the envelope! The product itself worked great. Connects easily as others have described. My old igniter took over 2 minutes…

Fixed our budget Kenmore. I chose it because it looked like the right fit rather than the model number and it works great. The OEM part was three times the price. It is very difficult to access the part inside the oven, but it is very easy to install. The included ceramic wire nuts are a necessary and very valuable addition. Our oven has not always, often not ignited for a long time or only ignited when I turned on the stove (?). Starts up quickly every time. Use a clip on a multimeter to check

My old igniter glowed and got hot enough to ignite the gas valve but wasn't hot enough to ignite the gas quickly. This resulted in some loud pops as my oven preheated, and recently the oven stopped firing and just filled with gas. Not the safest situation in the world. Now that I've replaced the igniter with a new one, it fires instantly with little to no noise. I used this product instead of the Frigidaire igniter 316489403. I saved >$50 and the product works great. My old igniter only had…

I first went to SearsPartsDirect.com to look for an igniter for my furnace. They wanted $166 for it! Keep in mind that unlike this one, it comes with a matching plug that requires you to cut and connect the wires yourself. But really, if you're willing to take the furnace apart to replace the igniter, you might be able to figure out how to connect the wires together. This thing works like a charm, fits my mount perfectly and solved my slow oven heating problem with almost 90% savings. However…