🔧 Cabinet Hardware Jig Tool: Drill Guide for Cabinet Handles and Knobs – Template Tool with Storage, Perfect Power Tool Accessory for Easy Installation of Handles and Pulls Review

This tool worked very well the first time I used it. The only negative is the use of plastic for one of the rules. This is the perfect mount for those of us who need a precise rig from time to time. If I were an active user I would choose the same configuration but with metal rails in both directions. This is good value for money. There are no instructions, but the use is self-explanatory.

Worked pretty well for my use. I was able to adjust to three different setups without any problems and it worked out well. Only two cons: 1. It's a little hard to hold it with one hand without slipping, so keep that in mind when using it. 2. The fore/aft distance is somewhat obscured due to the shape of the plastic. So you need to do some math to figure out what distance you're using. I also suggest pressing the pieces of wood lightly against the back of the cabinet as you drill to prevent the…

Bought to add traction and handles when repairing kitchen cabinets. It works well, but not perfectly. And when it comes to having a vertical or horizontal long handle fully vertical, fully horizontal, or at least equidistant from the edge of the door, it has failed me. The smallest margin means that the work is not being done correctly. I'm not sure a jig of this type will work well when it comes to drilling two holes parallel to the edge.

Worked well but 1) The main slide drill guide is 1/4 thinner than the rest causing me to have to check where to stop the drill above my normal depth gauge. 2) The tee has a thin molded strip that protrudes from the guide surface and sits over the (wrong) edge of the product, causing the holes to move inward. Make sure to always place the tee flush with the top of the shelf. I realized I had to slide the thin strip across the top of the shelf and do the rest of the holes the same way. Will…

This is a very ingenious and easy 'hack' to get perfect dimensions when drilling holes for attaching or hanging items! Do it on the first try so you don't end up with a bunch of holes where there should be a hole! The guide bracket itself is made from high quality materials such as stainless steel and ABS plastic to ensure durability and many uses! This guide is very easy to use/adjust and highly customizable for versatility, for use in many different jobs to get the perfect measurements to…

This item was a must have for our new kitchen cabinets. After setting up the door handle tool, drilling holes became very easy and straightforward, and the results speak for themselves. All our rods are perfectly adjusted. A few tips for using this tool: - I taped the holes I didn't use to avoid tangling and drilling in the wrong place. - I used the largest drill bit I can fit into the holes to give myself some clearance when screwing in the tie rods. - It may be obvious, but you must keep the…

I am renovating my kitchen and have 66 European staffs to install new cabinets. We just remodeled our laundry room and installed poles in the same style and it took forever to line up and drill. We had a hard time getting the holes etc. together. With that in mind, I found this on Revain and decided to give it a try. There are no instructions in the kit but as someone mentioned you can find out after watching the video. It consists of two metal parts with embossed dimensions. If you look at the

I have just bought all new cabinet doors for our kitchen and my wife has selected a couple of cabinet handles which are long rods (2" and 8" with 2 or 3 holes on each handle) . It is extremely important that the rods are perfectly aligned, otherwise they will look crooked to each other or to the edges of the cabinet. So I bought this drill clamp. It's very versatile. Allows you to adjust the distance from the edge of the front panel of the drawer or cabin door. Has 4 pilot holes. All pilot…