🚚 Ampper White LED Rock Light: 20 Pcs Truck Bed Lighting Kit for Cargo Pickup, Foot Wells, Rail Light & More Review

Like. Like is incredibly bright. I use filament to light up my entire 1000 square foot yard with solar panels and their light is more than enough to work on my own. They're quite light, so both strings are in the same body, which could probably be operated on. Assembly was as easy as I used it, just screwed the screws straight into the wood frame. They already have attachment points on each light module, so don't worry about perforated wires. Each light module comes with a sticky backing which…

Let's see how they hold up over time when exposed to the elements. I installed them under my 4x4 to light up the area and for track fixes. I cut the rope into shorter lengths and placed a pair under the hood, front and rear bumpers, footpegs and fenders. They offer a good amount of light for the money and are easy to install with self-adhesive strips. Only use a good degreaser or alcohol to clean the case before applying the adhesive strips, otherwise they won't stick at all. Tip: I connected…

Built into the body of the F250 under the awning. Connected to the 12v wire on the 7 pin trailer. On a 2012 f250 you have to have the key in the ignition to turn on 12v on that wire, which is fine lest I accidentally leave the lights on and kill the battery. Ground connection I used a screw through a hole in the frame. I had to use my own wiring to get the right position lights to reach the switch wires on the left. The way they set it up is quite odd, there is almost no wire length at the…

What I liked was the brightness of the light once it was properly plugged in and the on/off switch was on. It comes with no instructions so it's really a trial and error install to figure it out. The 3m double sided tape is too thin and not thick enough to be pressed firmly against the surface for proper adhesion. The wires going to either branch of the lights (or the truck's battery) aren't long enough to touch for practical even application, so buying an extra wire is unfortunately a must…

Just installed so there will be an update to improve adhesion and waterproofing but installation was pretty easy. 2019 Silverado HD, 6.5ft bed. The headlights were mounted under the Truxedo's roll-up trunk lid to protect them from water and the stress of rolling up the lid. Added velcro to fix the switch in an accessible place. Pass the wires through the holes in the bed to make the installation cleaner. Connects to trailer wiring for 12V DC so only the switch is activated, eliminating the need

If you're good at automotive electrical work, this set is for you. No wiring diagram is supplied but I was able to look at the wiring harness and figure it out myself as I'm a former mechanic. Main wiring harness with switch: Large white wire: chassis/chassis ground. Red wire with fuse holder: Positive (to power). Small red wire on splitter: Positive (connects to white wire with red stripe on headlamp harness). Small black wire on splitter: Ground (connects to solid white wire on headlight)…