Pros
- 🎄 Includes the AOZ1284PI power regulator that supports an input voltage of 12-24V and a maximum output current of 4A - enough to power external components like LEDs and even Raspberry Pi;
Cons
- Only available in white
🚀 Enhanced Performance with BIGTREETECH Control Upgrade Motherboard Compitable Review
3
·
Average
Rating
3.3
🖨️ 3D Printer Parts & Accessories, 🏭 Additive Manufacturing Products
Media
(4)
Description of 🚀 Enhanced Performance with BIGTREETECH Control Upgrade Motherboard Compitable
🎄Integrates a AOZ1284PI power regulator which supports 12-24V power input and a maximum output current of 4A – enough to power external components such as LEDs and even a raspberry pi;. 🎄TMC Motor drivers can be used in SPI or UART mode by simply adjusting the onboard jumpers beneath each motor driver. Additionally you can connect or disconnect the TMC DIAG pin using an onboard jumper allowing you to use hard endstops or sensorless homing without the need to cut any pins. 🎄Includes a protection circuit on thermistor inputs which protects against short circuits between the heater cartridge and the bed heating element. This is a common mistake made by many users when replacing a nozzle or working on the hotend so we expect this feature to be a welcome one;. 🎄Includes an additional heater protection circuit which protects against runaway heating on the bed and hotend heaters. By default, the heaters are off so if the MCU or MOSFETs are damaged, the heaters will shut down instead of enter into thermal runaway;. 🎄If you have any questions, you can contact us via Amazon. We will help you to solve the problem which you meet. Thanks for your support and understanding.
Pros
- 🎄TMC motor drivers can be used in SPI or UART mode by simply adjusting the onboard jumpers under each motor driver. In addition, you can connect or disconnect the TMC DIAG contact via the built-in jumper, allowing you to use rigid end stops or sensorless homing without disconnecting contacts.
Cons
- will be added later
Pros
- 🎄Includes an optional heater protection circuit that protects against uncontrolled heating of the bed and hot-end heaters. The heaters are off by default. So if the microcontroller or MOSFETs are damaged, the heaters will turn off instead of going into thermal runaway mode.
Cons
- No instructions
