🖨️ Improved Creality Ender 3D Printer Bed with Tempered Glass - 235x235x4mm Review

There is nothing wrong with this printing platform, it gets the job done and does it well. It should be noted that the adhesion is really excellent as it took me a while to remove the print. This is great because you don't want to use a lot of substrate to print, you can just use a raft and this glass bed will be a game changer in saving filament! Just don't use standard binding clips on it, they are too small. Anything larger will work as long as it doesn't break the printable area. Sorry I…

I had stability issues with the standard Ender 3 where large prints wobbled and layers shifted. This glass bed certainly fixed that, but it also created its own problems. The center of the blade is bent so that the alignment of the edges causes the nozzle to scrape against the blade in the center. The center alignment resulted in prints not sticking around the perimeter due to the nozzle being too far from the bed. I haven't tried the standard 0.4mm bit as I've been using 0.2mm bits with 0.1mm…

I should have bought this many years ago. The magnetic mat that came with the Ender 3 is fine. After a while adhesion became erratic and no cleaning helped. Another problem is that the 1st generation Ender bed can warp easily after prolonged use. The middle of me was low and the prints stopped sticking to the build plate more than 50% of the time. It nails flat right out of the box. I only use 2 small binding clips on the front left and back right of the plate to hold the glass. I coat the…