🖨️ Enhanced Print Adhesion with Creality Printer Platform Tempered Surface Review

Bed is good and cover seems decent. The prints hold up well and it doesn't warp like most standard metal beds. However, a big warning when buying this bed is not to use alcohol to wipe or clean. This warning was nowhere in the description when I bought the bed. Obviously the alcohol interacts with the coating on the glass and wears away in streaks that cannot be removed. There are still prints but the bed looks very, very dirty. I'll probably turn the bed over at some point and use the back…

Edit: I use 70% isopropyl alcohol to gently wipe the bed between cleanings and I have had no issues with discoloration or damage. I run my hotbed at 70°C and nozzle temperature around 205°C. If you're having trouble sticking to the surface, try increasing the thickness of the initial layer, setting the edges, and adjusting the z-offset if necessary. I use CURA for slicing and found a good profile for this bed. I had a standard bed on my CR-10S Pro V2 which I upgraded after trying to scrape the…

I recently bought my second 3D printer and my previous printer used a similar glass bed with great success so I ordered it to go with my new printer. The first one I got was a real glass Creality bed, but it was curved - higher in the middle than at the edges. It's okay - everything happens and I have a bad block. I contacted the seller and arranged a return which went well - so far so good. In the meantime, I hooked up the printer to the metal platform that came with it, so I didn't install…