🚚 CURT 13333 Class 3 Trailer Hitch, 2-Inch Receiver, Compatible with Dodge Ram 1500, 2500, 3500 – Black Review

Even on my 2013 Ram the hitch ball cap does NOT fit over the top hex bolt. The thing just doesn't fit. I even tried to contact Kurt twice but they didn't answer me. I don't think there is a cap that will fit and help the bolt and bumper avoid corrosion from the elements. I have to say that this is very bad design. Had I known there was no lid to properly close this I would not have purchased this item at all. BUT THE FLAT BUMPER DOESN'T WORK, IT HAS TO BE A DOME. Someone needs to address this…

I thought it would be a quick install - it would have been less than 20 if I hadn't loosened the screw inside. Since I'm only doing 1, here are a few things I've learned for you. 1) Wear clear goggles to keep rust and anything else off your face. 2) I didn't have to drop the replacement part, I used a wrench to tighten it. 3) Once the wire is in place with the grommet and stud, use a bread bag tie around the stud or it might fall back into the tube, and good luck. Luckily it landed and I used…

Excellent Fit! This works great with a new Ram 1500 with a factory clutch in the bumper. The hat fits perfectly! Kurt nailed this kit. It has everything you need for easy digging. You only need a couple of big wrenches to tighten the huge Allen screw and 2 support screws! I was looking for this product that works. And finally I stumbled across Curts and they had the best price yet. If you have a clutch in your bumper, be so kind as to get that clutch. He lowers it and slides it away from the…

After much research I decided to buy. My 2012 Dodge Ram I ordered 13333 plus a 1/2" x 1/2" hex socket from Revain Prime. You will also need a 3/4" socket and a 1/2" ratchet. A torque wrench is also required as the torque ratings are quite high. I read the instructions online and watched a few videos before the parts arrived. When I got the parts I dropped the spare and installed the hitch in about 15 minutes. Super light and fits perfectly. Also, many reviews have said that the round connector…

Fits 2019 Ram Classic 1500 Warlock although it says it doesn't fit. First, it's well done. Installation was very easy and if you don't understand the instructions there are some videos on YouTube to help you. However; The torque on this hitch is absurdly high: 380 pounds for the M14 (main bolt) and 110 pounds (the other two bolts). I have a torque wrench that is only rated for 150 lbs and I have not been able to find another that will work over 250 lbs. It was difficult to tighten the main bolt

Good. This worked great for my 2019 Ram 4x4 Classic. What is not mentioned in the installation is that the new receiver must be tilted at an angle so that it slides under the bottom of the bumper. It slides right into the cutout with no problem (I show it in the photo), secondly, don't fully tighten the large hex head screw on top, just enough for it to snag and move. I think that's why the review says the screw isn't flush because he tightened it all the way before installing the other screws.