📷 Universal Front Rear View License Plate Reverse Camera eRapta ERT02 with HD 720P, 149° Perfect Angle Night Vision, Mirror Function | Waterproof | Ideal for Pickup Trucks, Cars, and SUVs Review

When I first looked for Revain for backup cameras I was blown away by the options, ratings and price range. After a lot of research, I chose it because (1) lots of positive feedback about the manufacturer supporting their cameras, (2) this is a new model that solves the quality issues of the previous model, (3) Goldilocks price (not the cheapest but not the most expensive either). I almost missed this point initially because it doesn't have LEDs to illuminate my field of vision at night, but…

Good camera! Just went through the pressure washer with no problems. EDIT: 12/31/18 - The seller sent a new camera. I smeared transparent silicone on the edge of the lens, on the camera body where the mount attaches, and on the back of the camera, hoping to make it waterproof. Pictured is the new camera. I have returned to 5 stars! EDIT: 1 week error. Washed the car once and spent a day in the rain. It is connected to a new Kenwood DDX375BT. Communication is still good. Now I only see different

Very easy installation on a 2005 F350 crewed 4x4 and Pioneer AVH1440NEX radio. The instructions are a little vague, but easy to understand. Picture quality at night is not very good unless there is good lighting. Connect the rear CAMERA POWER cable (red) and the rear red video trigger cable. Remove the taillight, then connect these 2 to the pos(+) wire of the taillight. and black wire to ground. (This saves you having to look under the dash/fuse box for the reverse jump lead as it connects to…

I had a first generation backup camera from this seller, it worked great (this camera is now installed on the front of my truck). However, I wanted the camera to be mounted behind the license plate, not above it. I've been using it for about a week now and the image quality is still good (it was raining too so the waterproofing is working as expected). I installed it with a Pioneer head unit and wired it to a switch rather than the reverse as I wanted to turn it on whenever I wanted. than…

Luckily I already had a backup camera (cheap) installed on my RAM 1500 so all I had to do was cut the connector off the end of my existing power cable and use the connector cables to connect the power cable from the rear camera to it my existing power cord. However, if you are inexperienced in installing backup cameras, I strongly recommend that you have this camera installed by a professional. I'm not sure how long this product will last, so maybe I'll update my review and rating in a few…

I have mixed opinions on how to rate this rear camera because its video quality is really good and the build quality goes from poor in one batch to good in another batch or revision. When I first bought it I initially got a model with holes and a rougher frame finish that was already rusted in that area, while the replacement had a smooth finish with a square where the camera attached to the frame (see photo ). . . ). The wiring is also of poor quality, and by that I mean the cross-section of…

*Update* The first camera I bought that died on me within 3 weeks. Camera replacement died after 3 months. During work it was great. Disappointed with its durability. The camera was fairly easy to install on my 2008 Ford F150. The instructions were sufficient. For connecting to my trailer's clutch cables. The center pin of the 7 pin connector is the reverse light and then the white wire is ground. The camera turns on very quickly, the image quality is good. The length of the wire was enough for

I am a professional installer and have tried several different cheap used cameras. This is by far the best I've found so far! First, to address the "off-center" parking aid issue noted by a previous reviewer. It's not a camera problem, it's an installer problem. The cam can easily be adjusted up and down, left and right - a great advantage for Jeeps, Honda Pilots and other vehicles where the license plate is not centered. If your guides are a bit off to the side, simply adjust your camera left…

The camera seems solid and fairly well built; my picture is very clear day and night; no problems with water penetration; the cable was long and contained the reverse release cable; color rendering is very good; Installing the license plate was easy. I only had one problem. I had to remove the guide lines grafted on by the camera so I could use the adjustable lines on my LCD screen. Typically, this is done like this: Two thin wires come out of the wiring harness, which the installer cuts to…