🌈 Enhanced Dimensional Accuracy of Eryone Rainbow Filament Review

I can print other brands of PLA with my Maker Select Plus printer with no problems, but I was only able to print a very small portion with no problems. I watched videos on Youtube and used their printing temperature. I must have gotten a bad batch. I tried copper paint and gold paint with similar results as shown in the photos. The spools were sealed in liquid collection bags and I made a clear acrylic spool box on my printer to keep moisture out. The white piece image is a different PLA brand…

Color change and satin finish are super cool. Printed on anet A8 @ 195-205°C [nozzle] / 70°C first coat and 50°C normal temperature [bed] First coat 0.16mm [at 103% flow], remainder 0.08mm [at 100% flow] [ mm/s] 40 speed, 40 infill, 35 inner wall, 30 outer wall, 20 first layer, 125 stroke (80+ not recommended for standard machines) 0.2 walls and 10% infill (mesh). Supports with a distance of 0.16 z and a minimum xy of 0.4 mm at 60 degrees overhang. Stock, 29 initially to 32 after 10 coats. The…

Three colors included in this kit. copper is beautiful. I had some stretching issues that negatively impacted surface quality, but for the most part the print was pretty good. I messed up a print (my own fault) and the result really did look like a bunch of copper wire. The gold is just bright yellow, it doesn't really look like gold. The rainbow has very disappointing colors. Yellow looks beige, and lilac is closer to burgundy. The blue and green look great, but overall it was very difficult…