EWK 6L Vacuum Oil Extractor Pump: Efficient and Convenient Fluid Extractor for Automotive and Marine Oil Changes Review

This seems to be the second negative review I've ever written. I opened the packaging to see the damaged box of the product ok that's ok I will use the box anyway although the sellers don't try at all to make it look decent then I see the product has oil and even hair. on it.ok well I really don't care if it's used as long as it does the job? Well, kinda, but hey, I understand, and I might contact you later. unless I go to use it and find that not only is the packaging completely broken and it…

The easiest oil change ever. I've been wanting to buy an oil change liquid extractor for my Honda mower for a long time. And while the mower only holds 12 ounces of oil and is easy to tip and dump, this extractor made the process so smooth and clean! I ran the mower for about 5 minutes to heat the oil for faster draining, inserted the black drain tube and got almost every drop out - I lifted the front wheels about 10 inches to drain any remaining oil in the engine. return to drain/fill tube to…

To inflate the vacuum flask, you have to hold it or it will break. Annoying design. But the suction hose is good. The first time I siphoned off the power steering oil and it worked. THERE IS NO VALVE you can use to suck the air out of the bullet, so you'll either have to submerge the tube or do what I did, squeeze the tygon tube with pliers. You can then pump it out before installing the tubing. The small cap strap broke on first use. Uncomfortable, but I'll come up with something for that. The

I bought this pump to change the oil in a stationary outboard motor. After using it a few times I quickly became disillusioned with the design as I used others that were more durable and better designed for almost the same price. I thought it would be the perfect light version, but it's not. Good: The hose line fits the dipstick perfectly. As expected, the hose depth had to be adjusted as the engine oil level changed to maintain pressure. The hose was the right length and stiffness to fit into…

, as well as several of my neighbors' cars. I couldn't use it on my 2003 Porsche Boxter S or 2009 Porsche Cayman because the vacuum pump inlet tube is too stiff and could go around the bends in the dipstick or filler tubes. I also use it on my lawn mower and pressure washer. It takes about 30 minutes to remove the oil, so I usually vacuum the inside of the car while I wait. I give him about 30 pumps and come back about 10 minutes later and pump again. At first I was skeptical that this system…