EZ Oil Drain Valve Removable Review

I bought an EZ-106 for my 2013 Monaco Monarch Ford 550 V-10 about 2 years ago. The front axle is located directly under the oil drain plug and it is impossible to drain the oil without polluting the axle and the entire floor. Using the EZ-106 with a nozzle on the hose end, I can easily pour water directly into the tank. I love it. I bought a second EZ-106 oil drain valve for my 2013 Jeep Wrangler Rubicon. I just installed skid plates under the engine, transmission and transfer case and it's…

This is the best solution I have found to simplify changing the engine oil on my 2001 VW New Beetle 2.0L AEG. I bought this car used and it has been very well maintained. The only issue we encountered was a stripped thread on the aluminum oil pan drain. It was obvious that whoever had changed the oil for the previous owner had stretched the drain plug and stripped the threads. This situation could not be corrected with a tap as most of the aluminum thread material was completely gone. I…

This is probably the smartest car purchase I have ever made. I use an EZ-106 on my 2017 Honda Civic LX. Installation (if you can call it that) was easy and straightforward. No leaks or anything like that. The valve works as intended. I use a 3 foot piece of vinyl tubing to attach to the nipple and allow the oil to flow into the sump. Draining the oil takes a little longer than with a regular factory screw, but doing it without spilling or oily hands is a good compromise. The quality is top…

I bought two EZ-106 EZ drain valves, the first about a year ago and the other recently for a second oil separator. The oil cans shown in the pictures are available from Revain. Search ASIN: B085NCY2S8 "SPEEDWOW Coolant Radiator Expansion Bottle, Aluminium, 1L" if you are interested in this item. The 14mm 1.5 protector fits perfectly into the threaded hole on the bottom of the sump and allows me to attach a drain hose for draining when the sump is full (usually about every 1-2km). Overall, this…

EZ-106 fits my 2002 Ford Ranger XLT 4.0L SOHC perfectly. Bet on this one, but I'm glad I did. This one will stay on my truck forever! I just want it to include a hose to connect to the injector. Looking forward to my next oil change! UPDATE: Well, I just changed my oil with this valve for the first time and am very satisfied! I had a hard time turning the lever at first because I couldn't remember if it was pushing and then sliding or moving up and then sliding. I thought it was stuck but it…

The review is for an EZ 106 combo with a straight hose end. In summer I usually have to change the oil while driving. That's dirty work because the plug is on the side of the oil pan. The oil will be hot and will spill out when the plug is removed. A few spontaneous solutions didn't work. I bought this for several reasons: it has an anti-sump o-ring; chromed; Supplied with hose end; was cheaper than its competitor. I installed it between oil changes and only lost about 8 ounces of oil. The…