🔥 The Stop Shop Fuel Injection Fuel Hose 30R9 3/8" I.D. 6 Feet USA with 4 Clamps - Top-Quality Performance and Durability Review

Tensile Strength 900 psi in. Designed to work with both gasoline and diesel fuel. Flexible, easy to bend and fit over hose. The clamps that came with it were the right size and attached tightly to the hose.

For some reason 3/8" FI hoses are rare around here. They kept running low pressure hoses as FI hoses. I got fed up so bought this hose. No problem , and I have a dpare in case I need it.I use solid clamps, no sketchy worm drive clamps and no leaks.

Uses this hose on 2 cars of different projects. Worked great at first. About a year later, both machines experienced the same error. I believe this hose is not compatible with the ethanol used in modern fuels. The hose starts to deteriorate from the inside, and eventually the clamps fail and you end up on the side of the road. Ask me how I know!

This is not a fuel injector hose, it is a traditional low pressure carburetor fuel hose and is not approved for ethanol. It is spongy and definitely does not take high pressure. Spend your money with the gate or get drunk. The "Fuel Injector" hose is stamped on the hose itself at 225psi on the Gate and Napa models. Money wasted for that. Fake advertising sucks.

I used this for the fuel line on my car and in less than 2 years the lines had hardened to the point where they couldn't be clipped on and became inflexible. Some lines were hard as a dry stick from end to end, and some sections were hardened, the rest was a bit flexible. I wouldn't use them for anything because of fuel leaks and possible fire. I have some 1972 bungee cords that are much better.