GIGABYTE B450M DS3H V2: The Ultimate AMD Ryzen Motherboard with Micro ATX, HDMI, DVI, and USB 3.1 Support! Review

If you plan to install two video cards, consider the size of the case and the size of the video card. I have a microATX case, as well as the mat itself. pay. But the second video card is not possible to install. Since due to the design of the case, the new video card almost rests on the bottom.

Everything started up, the mother pleases and justifies its price, I bought it for 4250, (by the way, many thanks to the support operators, they helped me buy cheaper) now the board costs 6770, the maximum was 8700. It is very difficult to buy for adequate money, literally for a month I had it in my basket, I had to monitor prices at least 3 times every day, the market is disgusting! Only once every two weeks the price is reduced. If you saw this fee for less than 5 thousand, then feel free to…

the first board did not start under 5600 G and 2200 G, the seller exchanged it for me, and on the second one everything started the first time, all the components are the same as with the first board, I don’t know what the reason was, but now everything works fine

Packed well, the mother is cheaper than the market + received cash back from through tinka. Saved) It came a little later than promised, but dreamed of the price, in general, I am satisfied with the purchase.

At the 2700s, it heats up like your mother's frying pan in the morning when she makes you scrambled eggs. In general, no VRM Ryzen 3 Ryzen 5 is ok. Bad request do not put .

I didn’t overclock the processor, there were 4 120mm fans in the case, I just turned off the computer when I went to work and the mother didn’t turn on anymore.

I'm not an expert. I chose the motherboard based on reviews and user reviews. In general, I'm happy with the choice. I think RGB fans will like it)))) The only thing when installing the video card is the SATA connector

I do not understand where to look to see at what frequency the RAM is running. There are two lines in the bios, one says 2133 and the other 3200. Do not set the option for ultra-fast bios boot, I could not enter the BIOS via DEL, I just did not have time to press. I turn on the computer . and the desktop.

Mat. B450M DS3H won't start with Ryzen 7 1700x. I bought a new one, in a large 2022 online store. It reacts to the power button, the LED strip on the board lights up, the cooler on the processor spins up and that's it. In the minimum possible configuration: percent, power supply (powerful), mother, speaker - even the speaker does not squeak about the lack of RAM. Just do zero - n and h e g o! On the forum (forum. Gig*yte. Ru) they rub the game about the fact that gigabyte motherboards really…

Arguments in favor follow below: Price. In fact, the cheapest board with 4 memory slots for the b450 is A little bit of lovely backlighting there. Available M2 NVME power circuit radiators With its drawbacks: Having just one port for a case fan is, frankly, insufficient. Gigabyte-specific BIOS

At first, I was concerned about the slowing of the food chain's progression because of a mother stone that is worthy of stones for budget stones. After conducting several testing with a factory-default R5 3500X, I was pleasantly surprised to find that the VRM temps did not exceed 60 degrees Celsius. I scratched my turnips and upgraded the CPU to 4.3GHz at 1.44v. Once again, the VRM temperature was between 60 and 65 degrees Celsius. I even find it dull, yet I've worked the time in my head to…

Not suitable for fine-tuning the system, voltage offset instead of the exact value. Because of this, it heats up (The insert works at 1.4 - 1.55 V.) The voltage is not applied in the BIOS. Of the benefits, it starts up on cheap memory and overclocks it without problems. Has pros: Price Guarantee 4 memory slots. Memory on different chips 16 GB very cheap 2400 Hz wound up at 3000 Hz using the Ryzen timing calculator. Has some cons: No Usb 3.1 It will not be possible to set the exact voltage, only

I have been using this motherboard for a year, during this time I changed a couple of cases, several processors, RAM. In addition to the location of the sata connectors, I do not observe any shortcomings. Now it works with R5 5600X and 3600mhz RAM in xmp. The abundance of negative reviews is surprising, but maybe I was lucky. The computer is used daily, there were power outages, no UPS, no problems.

The board is clearly not for strong overclocking, but for light it will do. Due to the presence of offset'a, it is well suited for X processor versions. I do not recommend buying this board if you want to buy an 8 core, 6 seems to be dragging. Got pros: Price 4 slots for DDR. There are heat sinks on the processor power Overclocking with offset, which is why overclocking is quite easy Has cons: No LLC Offset SoC raises the voltage on the SoC = 120224v (that's a lot) I got samsung b-die 2x8G…

Very inconvenient Bios, during overclocking, my mother overestimated the timings and voltages of the RAM. SATA ports are very inconveniently located. And further. If you have RAM on Nanya A-Die chips, be prepared to forget about any overclocking (even XMP), the memory will be in stock if you set XMP-cycle reboot. Buy better S2H or B550.

It was purchased to test the am4 platform complete with razen 2600 and corsar 3000 MHz CL15. Everything started up without problems, the RAM overclocked to its 3000 MHz by turning on the profile. But the processor was overclocked to 4GHz. Ran a stress test and everything is stable. Rendered the video, everything was also good. Then the processor returned the purity to default, left the RAM at 3000 MHz. Already thinking of buying another set. As after the weekend, the computer simply did not…

Budget motherboard for 2nd generation Ryzen processors under socket AM4. Gygabite did their best to make this motherboard high quality and reliable. The AM4 processor socket of the B450M DS3H is powered by a “4 + 3” phase scheme, you can install up to four DDR4-2133/./3200 RAM modules with a total capacity of 16–64 GB, up to three PCI Express expansion cards, connect drives with PCI-E and SATA 6 Gb / s interfaces (the last - 4 pcs.), As well as USB 3.0, USB 2.0 (2 pcs.), COM and TPM module. The

Very pleasant experience for the price. I managed to get it for 4.5k, which is great for the money. In conjunction with a 6-core rise 1600 (without "x", lay for a long time, waiting for the moment), two 4-gig ddr4 2400 modules (2 more slots for growth), a 240-meter m2 disk and gtx 1060 3gb became the basis of an excellent budget gaming PC. One remark - I could not put win7 on it. As soon as I did not set up the work of usb ports, but during installation, the keyboard and mouse did not work (and

I assembled a Ryzen5 2600 computer on this motherboard for a schoolboy, installed 16GB of memory, a quiet Thermaltake Ural power supply, a good Thermalright Macho cooler, a 128Gb SSD and a GeForce 1060. It turned out to be an almost silent computer for an inexpensive price. Nothing gets hot, fans don't make noise. Turning on and loading is almost instantaneous, all toys fly, no glitches were noticed. Taking into account used video cards, 42t came out in 2022.

On this motherboard: Ryzen 1200 calmly wound up with an overclock of 22% - from regular 3.1GHz to 3.8GHz Crucial Ballistix memory started up at 3200MHz If you try at least a little bit, probably squeeze a little more from both memory and CPU, but I'm too lazy. In general, I am satisfied with the board, it is well suited for a budget build. There were two pieces in the household - it remained in the gaming computer, because. fits, did not fit the server due to the configuration of the SATA…