The motherboard is generally fine, it will even go under the 5000 Ryzen series, you just have to make sure that the BIOS version of the motherboard supports the desired processor. You need to keep this in mind when buying, as it may be that you bought an old board, with BIOS from the first versions, which only supports 1000 and 2022 series, and the processor is newer. However, you can get out of this situation by contacting the service center of the store, where they will ate the BIOS for 500,

Pros below: 1. Cheap 2. Chases. 3. 4 memory slots 5. radiators powered by processor Different cons: Dead after reboot. Coolers are spinning and everything. Doesn't beep and starts.

I have been using this swallow for 4 years, right from the month of its release This sweetheart has seen all kinds of processors, from 2400g to 5600g I ate it regularly, which prolongs its service life. I change parts all the time and it works great. I don't see any flaws in it. But one moment - either my RAM lags, or my mother's ports fall off, pay attention But not all the same, but only 3, there is one more, so everything is smooth!

Worked for exactly one month. Turned off in the evening, in the morning it does not turn on anymore. Everything spins and turns on, but there is no signal to the monitor. I checked the monitor from the laptop, everything is fine. I took it to work for tests, memory, video, working power supply. I found the same topics on the 2022-language forum, only with new mats. boards. They say check everything (up to the nails with which they nailed it), the mother is excellent! As a result, I ordered…

I don’t know what specific temperature Aida writes, but 50 degrees is a dofiga for applications that are not running in a zalman i3 ventilated case with 4 coolers at 100%. with COP 1.6 it heats up to 60 \u003d\. As already described in one of the reviews, sometimes when you turn on the motherboard, it beeps three times with a simultaneous start, then everything goes out, turns on again and beeps, and so 3 times. Then it starts. (Bios ated to latest). The next day, when turned on, it didn’t give

In general, in this price range, it is an order of magnitude better than its competitors. You can safely put even 8-cores on it (without strong overclocking). For 6 cores, this is quite enough. In tests, the VRM zone does not overheat. Some pros: - Affordable price - Good overclocking potential for both memory and CPU - 4 memory slots - Despite the small heatsink, the VRM does not overheat Got cons: - Well, they obviously stinted on the 2nd connector for the case fan, you can put only the CPU…

for the price it is topchek Different pros: you can install nvme, and the connector itself is located above the video card, you can put prots of the 5th series, and in general everything that will start at the moment BUT it’s not worth it for obvious reasons, I took it for 4200 (for a long time) Its cons: ONE! ONE mother will split it for additional cooling, from Ali I had to order a separator, x1 is closed by a video card and a tablet too, it’s lucky that the video card is not cumbersome, the…

I ordered the assembly on it as a guarantee against marriage. Proc Ryzen 3 2200G. Works without problems. Memory in XMS on 3200 was transferred easily. The mother is really budgetary, because the BIOS is terrible. Based on it and the power system for 3 or 5 Ryzen, they can be slightly overclocked with an appropriate cooler. From 7, apparently, measures must be taken to cool the food

Bought to replace ASRock AB350M PRO4, which did not work adequately with R5 2400G. Great board for a budget build. There is a minimum of everything you need. I had to mess around a bit with the bios and cooling, but it was worth it. Samsung RAM on B-die worked at 3400MHz with timings 14-16-16-16-36 1.4v, R5 2400G works stably at 4000MHz, the video core managed to fix it at 1550MHz. I was very pleased with the normal slots for RAM, from which it is not scary to pull it out.

Probably for ordinary gaming such as "solitaire and kerchief" this mother is suitable. But for normal - not suitable. And so a very unsuccessful design - if you have a full-fledged 2-slot vidyuha, then get ready - it closes half of the sata ports, the card was made by a half-educated engineer. Big problems with the correct cooling, as a result of which it quickly dies. So the guarantee will definitely come in handy. I lived 1.5 years. Now - video power drops, brakes under load, video began to…

The board visually seemed to have been reworked at the factory (it’s unlikely that they slipped me a repaired one, it just appeared): some additional soldering and soldering is clearly not a robot. Due to the curvature of the BIOS, at first I thought that nothing was chasing: neither the processor nor the memory. It seems like a lot of settings, but nothing can be changed!?!? Then he accidentally pressed the inactive numbers and lo and behold, they change! :) Well, this is my first time dealing

Some pros: Price. In fact, the cheapest board on the b450 for 4 memory slots Backlight: a trifle, but nice Radiators on the power circuit M2 NVME available Different cons: Only one connector for a case fan - frankly not enough Specific bios from gigabyte

I decided to upgrade the hardware and try AMD, bought a ryzen 5 - 2600, rx 580 8 gb, samsung 970 evo 250 GB, HyperX HX429C17FB2 / 8 2933Mhz 16 gb, PCcooler GI-X5B cooler, left the old case and 550 watt power supply. I assembled everything, rolled up Windows and everything clearly works without dancing with tambourines, so I'll put 5. I don't do overclocking, so I won't say anything about it. Pure working machine to play sometimes. The only thing is that it is in an inconvenient place for a slot

I bought this mother to upgrade the system assembled on the GA-970A-D3. Since I planned to migrate Windows 7 x64 from the old system to the new one, the processor was selected with the appropriate core. Rebuilt the system, launched. I had to dig further into the bins of a PS / 2 mouse, because the system did not see any USB ports without drivers. Installed the drivers from the DVD. USB 3.0 works, but USB 2.0 and 3.1 don't. The first thought is a conflict with software from the old system, but a

A worthy mother for stones for budget stones, at first I was worried about the cooling of the food chain . I ran tests with a stock R5 3500X and was pleasantly surprised, VRM temperatures did not rise above 60 ° C I scratched my turnips, and overclocked 4.3GHz to 1.44v And again VRM 60-65°C. I think it’s even boring, I sharpened the timing in memory. Undervolted the video card, overclocked the monitor. (And I'm not kidding) P. S, perhaps this is the best thing you can buy for 5-6, the minuses…

Restore my son's computer after a bad crash. Couldn't afford the high quality motherboard he had in his computer. Buy this motherboard temporarily until we get the right one and now I think this motherboard is here to stay. It worked flawlessly, cool and restored my son's computer after a bad crash. Couldn't afford the high quality motherboard he had in his computer. Buy this motherboard temporarily until we get the right one and now I think this motherboard is here to stay. It runs flawlessly,

Nice quality. Good pay for the price. Arrived with a new BiosLike LED on the back of the board. One star, very mean FAN connections. 2 only. Get an extension (5-7) if you want to use more than the CPU and rear fan.

I wanted an ATX B450M DS3H V2 motherboard to install the Thermaltake Core case. Apparently Ryzen 5000 series processors will not work on this motherboard. . . although the documentation says it's compatible. You MUST have an updated BIOS installed to boot this motherboard. like that . . . Here's the catch: you need a bootable motherboard so you can update the BIOS, but with a lower BIOS and a NEW CPU, the board won't boot. Solution: - Return the motherboard to Gigabyte for a BIOS update. OR…

I ordered this motherboard for a rebuild along with an Athlon 3000G APU and a TeamGroup 3200 DDR 16GB kit. Out of the box it wouldn't start and just showed a black screen (although the fans and MB lights did light up). I did a little research online and found that some of these B450 boards need a BIOS update to use the newer processors. I took the Athlon 200GE from another computer and was able to install Windows and update the BIOS to the latest version (F60c dated 10/29/20). I switched the…

Hey it's a budget MB so I got what I paid for. I could have gotten even cheaper but I needed 4 RAM slots. Could have spent a little more time on the included manual and a little more screen printing on the front header connectors, but ok that's a minor issue. When I tried it for the first time with no drama, the Win 10 installation started flawlessly and made the USB installer choice for me. M.2 came in without any problems and works perfectly.