Header banner
Revain logoHome Page
⏰ hicarer pendulum clock movement quartz diy kit - replacement movement mechanism with 0.9 inch shaft length for pendulum clocks logo

⏰ Hicarer Pendulum Clock Movement Quartz DIY Kit - Replacement Movement Mechanism with 0.9 Inch Shaft Length for Pendulum Clocks Review

5

·

Average

Revainrating 3 out of 5  
Rating 
3.2
🕰️ Clock Hardware, 🔧 Hardware

View on AmazonView on ЯM

Media

(4)
img 1 attached to ⏰ Hicarer Pendulum Clock Movement Quartz DIY Kit - Replacement Movement Mechanism with 0.9 Inch Shaft Length for Pendulum Clocks
img 2 attached to ⏰ Hicarer Pendulum Clock Movement Quartz DIY Kit - Replacement Movement Mechanism with 0.9 Inch Shaft Length for Pendulum Clocks
img 3 attached to ⏰ Hicarer Pendulum Clock Movement Quartz DIY Kit - Replacement Movement Mechanism with 0.9 Inch Shaft Length for Pendulum Clocks
img 4 attached to ⏰ Hicarer Pendulum Clock Movement Quartz DIY Kit - Replacement Movement Mechanism with 0.9 Inch Shaft Length for Pendulum Clocks

Description of ⏰ Hicarer Pendulum Clock Movement Quartz DIY Kit - Replacement Movement Mechanism with 0.9 Inch Shaft Length for Pendulum Clocks

Good package: come with specially designed blister cardboard box and instructions, convenient to carry. Pendulum clock mechanism size: total shaft length is 23 mm (0.9 inches), thread length is 14.6 mm (0.57 inches); Jump second movement, suitable for 9 - 13 mm (0.35 - 0.51 inches) thickness clock panel. Size from the center of the hole to the tip: the hour hand approx. 68 mm/ 2.7 inches; The minute hand is approx. 98 mm/ 3.9 inches in length; The second hand approx. 100 mm/ 3.94 inches. Wide application: applicable to cross-stitch, three-dimensional embroidery, craft clock, frameless draw clock, etc. Warm notice: when you install this clock movement kit, please keep the hour hand and minute hand parallel, and please check the sizes before buying.

Reviews

Global ratings 5
  • 5
    1
  • 4
    0
  • 3
    3
  • 2
    1
  • 1
    0

Type of review

Revainrating 2 out of 5

The reamer stopped working after 1 year.

After normal operation for approx. 1 year. the sweeping hand started getting stuck, so it stopped counting the time. Only sticks when the clock is upright (hanging on the wall). After taking it off the wall and putting the clock on the back, it works great and shows the time. I deleted and reinstalled the scan, it didn't solve it. There is no contact with the manufacturer and Revain has no warranty contact. It would be a Pity if after 1 year the clock only worked if you remove the sweep hand.

Pros
  • Easy-to-read control panel
Cons
  • Negative impression

Revainrating 5 out of 5

Great replacement. good for hardware

movement was a perfect replacement. First I made a mistake and ordered a replacement without the pendulum. I found out before it was sent but too late to stop it (so I have to return it). My only problem was having a hard time removing the old one. With my husband's help, we pulled it out. The direction for the new was clear. After I installed the replacement, it worked. My pendulum swings too. I will enjoy my wall clock again, which is probably at least 30 years old. I have many watches so if…

Pros
  • high quality workmanship
Cons
  • sparse instructions

Revainrating 3 out of 5

Lasted almost 2 months with no problems

Very easy to install only lost a few minutes in the first two days. A month later, the loss of time became frequent. In the last week it stopped completely. When I press the clock or open the face, it runs for a few minutes before stopping. I will not bother with the return as the price is not worth the hassle. I'll spend a little more for the next one. Fast forward: I took a close look at the hands and noticed that the convex glass on the dial was pressing slightly on the seconds hand. This…

Pros
  • Delivery was very fast
Cons
  • There are cons

Revainrating 3 out of 5

Everything is in hand.

I'm pretty good at messing around with these cheap gear sets. If this little watch wasn't a souvenir, it would end up in the trash. I have a ton of moves, hands and everything else to make one of these work. However, as it turned out, none of my pendulum mechanisms had a pair of hands that would fit in the spindle mount. It wasn't originally a pendulum clock, but I thought I should go ahead and "decorate" it a bit. I was excited to see the movements that come with a variety of hands - different

Pros
  • Easy to use
Cons
  • Weight

Revainrating 3 out of 5

Great concept! But works better on its own

I bought this combo charger to replace my old Tylt charger. It lives up to the ad, with two charging parts that connect magnetically and can charge your phone and headphones. It's definitely a great concept and doesn't take up much space on my desk. While everything else with it is 5 stars for me, I give it 3 stars overall. I did this because it doesn't work very well when both chargers are connected and powered by the same charger. If this is the case, the phone will charge perfectly without…

Pros
  • GOLS certified
Cons
  • Only available in black