🚗 Husky Liners 58136: Custom Mud Guards for 2019-21 Ram 1500 with OEM Fender Flares (NOT TRX MODELS) - Front and Rear Set Review

I fitted the front fenders and they fit perfectly. Easy installation with existing screws and holes. I used a clamp and an extra screw inside to hold the existing part a bit tighter. The rear ones fit and mate with the existing holes, but there wasn't a convenient place to put the extra clamp and screw to hold the existing part in place. The gap is decent, but I don't think anything will collect there. It's just that visually it's not noticeable through the truck and they look nice. I'll keep…

Fairly easy to install, I chose to add an extra clip and screw rather than relying on tape to hold the protective case in place. The fit of the new 2019 Ram Rebel styling with fenders and rear wheel arch liners was excellent. No pruning required. Just a small note: PLEASE include a hex head screw like factory screws, not Phillips screws. This would be a lot easier to install with a ratchet than trying to work in such a tight spot with a screwdriver. Looks strong and high quality. Also, a…

Update: I just bought another set for the 2020 Ram 1500 and it's clear the Husky liner is the way they to be produced has changed. Others have commented on the gap behind the guard where the screws don't touch and other obvious design flaws. The quality has gone down! DO NOT BUY THIS JUNK UNTIL YOU FIX IT OR IT IS OUT OF SHOP! I would highly recommend them to all 2019 Ram owners. I've had Husky liner guards on my previous Rams and they've always held up well. I bought these for my 2019 because…

They fit my 2019 Ram 1500 Big Horn perfectly! I don't have bow extensions so I ordered the no extensions option. No gap like others. I think they might have a Limited trim which I understand is a bit different. They were very easy to install and used factory holes/screws. There's double-sided tape that supposedly keeps them on the pads better, but they came off almost immediately despite cleaning and pressure. The kit comes with small pad mounting brackets that you can use to drill a small hole

These are quality valves that look good installed. However, the assembly was not so easy, especially on the rear wheels. Using the screw mounts already installed on the truck worked great and was easy to do. However, the 3M tape that was supposed to hold the back together turned out to be unusable. All four wings didn't hold up at all. So for the fronts, I had to turn the wheels to get to the screws that hold the cover in place. You should be fine. The rear wheels were more of a problem as you…

Easy to install! The transparent paint protection tape worked very well for me. There is a gap of approximately 1/4 inch between the wing flare and the flare molding. I don't think it should be like that. I read on the forum that 1/4" gap is perfect for Rebel and No Limit (no gap). I will update this post when I know more. ***Update: I called Husky a week ago and via Emailed pictures of the clearance issue. I checked to make sure they received my email with photos. They didn't reply to any of…

I have a Husky "FRONT AND REAR MUDFLAP SET, PART NO. 58146 for models without factory fender flares installed on a 2019 Bighorn with the Original Equipment "Fender Liners". Coming from a 4 GMC Sierra I'm used to having fender liners as standard and I think aftermarket parts reflect that. I couldn't find any Husky installation instructions with full fender liners, only fender flares. I encountered an issue with protruding plastic interfering with the solid liner. Looking at the affected area I…

I'm a big fan of these Husky front fenders for my 2019 RAM 1500 Rebel. My truck comes with big 33" all terrain tires and has these fenders to keep rocks off the rear fender. I'm not a fan of footpegs/steps or expensive protectors so I went with these fenders. in fact I also ordered the Weathertech front to compare before installing it. The material quality in terms of smoothness seems to be better on the Weathertech but everything else speaks for the Huskies. , which hugs the factory fenders…

Love the front guards. The rear ones don't fit right. I contacted Husky and they said that the 2019 RAM (new model without fender flares) has some options that cause their guards to be misaligned. What surprises me is that they don't consider multiple options. I read a lot of reviews before buying and I don't remember anyone having the same problem so I believe there are most likely 2 options. (1) Start of production 2019 and (1) End of production 2019 - Fig. 1: Rear protection with adhesive…