🔪 KOWOOD Router Bits - High-Performance Milling Cutter Tools for Precise Cutting Review

The cutting surface of the bit is cracked due to improper shipping packaging. The foam holding the bits in place is not strong. Bits anywhere in the box collide with other bits. Pure engineering intent. It is very inconvenient to pull out bits. Some bits are tight and you may cut yourself. The functionality of the bit was not checked. I have returned the product and will not purchase a set in such a box.

Can't comment on durability as I've only used it on one project so far. They seem to be well built, there are no burrs on the instrument, the case is good too. They made very good cuts for my first project with them. It is difficult to take the instrument out of the case at first, you must be careful because you can easily cut yourself when removing the instruments for the first time. I made a start for the case because it initially holds the tools so tightly that they are difficult to safely…

I am new to woodworking and after doing some research I decided to invest in a well tested set to see which bits I would use the most and move on. Good reviews after good reviews made me decide to order this set. Disappointed to see a mess of beats. Also surprised that no one mentioned this poorly packaged apology. As already mentioned, they are painted and not powder coated. The word "cheap" that comes to mind. Have you heard that the manufacturer/seller takes pride in their product?

Received my KOWOOD 35 Piece 1/2" Woodworking Tee Bit Set from Revain today and the following set arrived damaged: middle row bits were lost what to Damage to the housing resulted.- Blade chip for flush with bearing, D 3/4", H 1"- Blade chip for slotting tool, H 3/8"- Blade chip for wave edge bits, R 3/16"- Chip in of the blade of the Roman Ogee bit, R 5/32" - chip in the blade of the even bit, D 1/8" - chip in the blade of the panel pilot bit, D 1/4" will die Review based on update…

Decent price for a set and you get a lot of bits. Good for carpenters and weekend entrepreneurs to have plenty of choice at a reasonable low price. But this is probably not a set for everyday use in the workshop. Disadvantages > Thin carbide. So far none of them have snapped but they are thinner than good brands and if they are used every day I think they will break soon. For example, there are 13 of them! Straight cutters in different sizes, 5 with ball bearings. This could be done with a…

I wanted to get into woodworking so I got everything I needed, this set was part of that and the bits did not disappoint. Each comes with super sharp blades. I've made over 20 doors for my kitchen and several drawers with a 1/4 straight cutter for most cuts and the blades are as sharp as the day I opened the drawer. The suitcase is good too. Photos and measurements are printed on the inside so you know what goes where and which bit makes which fine cut. Finally a very strong shaft that I don't…

I received my KOWOOD 35 Piece 1/2" Wood T-Cut Bit Set from Revain today and the following components of the set arrived damaged :- The middle row of bits was lost when the body was damaged.- Chisel chunks flush with bearing, D 3/4", H 1" - grooving tool blade chunks, H 3/8" - serrated chisel blade chunks Edge, R 3/16" - chip in the blade of the Roman Ogee chisel, R 5/32" - chip in the blade of the Straight chisel, D 1/8" - chip in the blade of the chisel Panel Pilot Bit, D 1/4 " Will update…