🛴 Jesdoo Solid Tire Replacement for Electric Scooters Xiaomi M365 / Gotrax GXL V2 - 8.5 Inch Explosion-Proof Solid Tire Replacement for Scooter Wheels Review

These tires are great for the Xiaomi M365 scooter. do it again We include the necessary lubrication, 24-inch mounts and a Phillips screwdriver. Find user acs22046 on YouTube, I used his method. I just drove around and didn't notice any difference in performance. A complete piece of mind. Using long pry bars, heat the bar in the microwave (3 x 1 minute heat), brush one side with fat. Using long zippers to hold the bottom and then prying it up was a magical way to put it on. After 4-5 hours of…

My first M365 had a flat front tire and thought it would be easy to patch a tire or change an inner tube. Taking the wheel off was easy, but I couldn't get the tube out of the rim! After playing with it for several hours, I sawed off the valve stem and started looking for a better solution. I found these tubeless tires and ordered a pair even though I only had one flat tire. I got the tires, read about the experiences of other users and can say that they are not easy to mount, but not…

I used to be a scooter mechanic so I changed a ton of xiaomi m365 tires. I recently got my own Xiaomi and decided it was best not to deal with flat tires so I bought these. The front wheel was very difficult to assemble! I boiled the tires in an outdoor pot on a grill (smelly) and mounted the rear tire with gloves, petroleum jelly, zip ties and 3 long tire levers. I've attempted twice to mount the front tire by pressing on the edge of the tire with my knee or boot and prying it over the rim. I…

, I've been watching a lot of videos on the internet trying to figure out how to fit these tires and I was wondering what I'm getting myself into. I called bike shop after bike shop and nobody did it. All the videos I've seen on YouTube show that it's very difficult for the guys to mount these tires. After watching everyone use different techniques, I developed my own and was able to mount a tire on a rim in just ten seconds! No lie, I found the easiest way to do this. I didn't need any special

I was hesitant to buy a solid tire. The Hover1 Pioneer doesn't have the suspension and setup nightmare stories you hear. Installation - I thought it would be more difficult. I used about 1 tablespoon of dish soap, 1 regular screwdriver for leverage, a mat, gloves with decent dexterity, and 2 fairly large zip ties to hold the tire in place. Microwave the hoop for 1 minute on each side, then 30 seconds on each side. It smells light, but for me it is light. It's really hot so wear gloves. I used…