High-Quality Flow Matched Fuel Injectors for Ford 4.6 5.0 5.4 5.8 - Replaces 0280150943 (Set of 8) Review

I bought these after replacing a few parts on my truck, my old injectors were over 200k I just did gasket heads and replaced the fuel pump and fpr and decided to add a set of injectors to keep everything new. Injectors are cheap and junk. My truck started spraying fuel out of the exhaust while idling and smokes like a wood stove. Don't skimp on your injectors, buy originals. Replaced my old injectors and works fine, ordered a new one from Ford.

I installed them then had to remove them for another service. All but one left the bottom half of the injectors (not just the o-rings which would have been normal, they left the filter, o-ring and bottom half of the injector) in the intake manifold bosses, although I was careful about my removal process . I wouldn't recommend them for more than one installation and then I couldn't tell you how long they would last. However, the company processed the return very quickly and refunded my money.

An over-enrichment alert will silence your cat. If you're not careful. I got these injectors when I rebuilt the 5.8 liter engine on my 1993 f350. They work and fit great but my mileage dropped to 8.35mpg. I've seen a few replies saying they're 24lb/hr atomizers, but my goodness. I have good strength, but it's little compared to the stock build. These jets are too deadly for the everyday driver. My mileage should be 15 mpg or so. In order to build performance, they have to work. I will take them

In general I am satisfied with the set of injectors. However, one of the injectors was faulty and I recommend testing each before installing to save yourself some frustration. You can do this in quick order by following these steps: 1. Read the ohms resistance on the coil.2. Use the alligator clips to connect the coil to the car battery and the clamp wires to the pins and listen for the "click" to see if it works.3. The clamp leads to the pins and blows through the nozzle. Air should not flow…