🚴 Oumers Bike Crank Extractor and Bottom Bracket Remover: 16mm Spanner Wrench + Crank Puller Tool Kit Review

Bought to replace the bottom bracket on a 2011 K2 Base Sport. The tool has held up well on a bike that has never changed its bottom bracket. If your bike is like mine, you need a friend to squeeze the back of the tool while you turn it with the ratchet and handle extension to keep the tool from snapping its teeth around. None of this is a complaint about the tool, it works well with an imperfect car design. The tool holds up well and shows little damage despite repeated tooth cracking. Would…

Crank puller and bottom bracket puller did not work as advertised. The wrench that comes with the kit is pretty cheap and not very good. Instead, I recommend using a 15mm wrench. Make sure you clean and lubricate the threads on the crank puller before use and take your time to ensure the threads do not cross. I took the crank off a fairly new bike and it was still a bear. I had to use a 24" breaker to finally disconnect the cranks from the spindle. So don't be afraid to use force on it as it…

Removed the bottom bracket and crank from a 25 year old bike, both have never been removed. The nut worked. The black paint had peeled off most of the teeth but they remained fully functional with no visible damage to the metal teeth themselves. It has endured a lot of force. The wrench that comes with the kit is not very strong as others have said. I had to use a broken bar for the bottom bracket, but I should note that I was able to remove the cranks with the wrench provided (which bends…