🔧 High-Quality 2 Pack Replacement Drive Belt 5140010-28 for DeWalt DW735 DW735X Planer - Enhance Your Planer Performance Review

These are excellent replacement belts. When you want to practice switching out things you don't need and cleaning your slicer of scraps of tape. A factory belt has lasted me more than 5 years. I have used both of these straps in less than six months. Save money and time, buy original belts.

Received in good condition. The belt fits but is wider than the original. He went into all the grooves of the pulleys without a heel. Literally fell apart on first use. Obviously not intended for this application. Someone is trying to sell because it fits the car. hands off it!

I have an Electric Harbor Freight Planner that did not identify the replacement drive belt serial number or description. Unfortunately the only finished one is tattered so badly that I did a lot of research and a couple of disappointing purchases (wrong sizes). Then I came across them at Revain and gave it a go - 💥💥💫 works great.

I recommend watching some videos on how to install a belt. The first thing you will notice is that the belt needs to be flipped when coming inside out. Remove the cogs and chain, put the belt on the small pulley first, then slide the belt over the large pulley as far as it will go, use the ratchet and socket wrench and turn the large pulley clockwise while you apply pressure to the belt. Turning will be difficult for the first few seconds, but keep turning the pulley and the belt snaps…

Made the mistake of restarting after turning off the switch while the part was still in the car. Burned the belt immediately. The factory price of the belt is outrageous. The color was different from the factory belt but otherwise appeared to be identical. Check them before you put them on as mine came inside out, longitudinal grooves out. It just had to be turned around. It's a very tight fit, but feels like it's holding the wheels well. There is a good video on YouTube with great advice on…

I bought 2 belts because of the price and good reviews. For me, belts are complete rubbish and nothing more than useless. Melted off first belt change after 9 passes over hardwood from planing discs. When inspecting the belt through the engine cover, there were many small melted pieces of belt and these pieces were still very hot. I then installed another belt after cleaning the pulley area. I did the second belt change in 6-7 minutes without stressing it. It was hot, but he seemed to be…

I needed a replacement for my DeWalt 3 Blade Planner and ordered this set despite mixed reviews. I took information from a previous reviewer who said that the straps were turned inside out and needed to be heated for installation. His observation was correct, the belts had to be in the shape of a "gear" on the outside and it was flat on the inside. To heat them up I used hot (200 F) water. This helped provide some stretch, but not exactly what was needed to avoid damage. First I put the belt on

After reading many reviews on this product, both positive and negative, I decided to buy a DeWalt OEM belt and this one Pair of parts to order. belt for comparison. I got the OEM belt from Replace Parts.com for about $45. The OEM belt is manufactured by Taiwan Synchronous Belt Co., part number 171-JM-9. There is no item number on Jtex tapes. After receiving both belts, I pulled out the locksmith's tools to take some measurements. Both straps are 21.6mm wide throughout and both straps are 4.2mm…