Header banner
Revain logoHome Page
🔧 enhance your additive manufacturing with polymaker asa filament 2 logo

🔧 Enhance Your Additive Manufacturing with Polymaker ASA Filament 2 Review

3

·

Poor

Revainrating 2 out of 5  
Rating 
2.0
🖨️ 3D Printing Supplies, 🏭 Additive Manufacturing Products

View on AmazonView on ЯM

Media

(4)
img 1 attached to 🔧 Enhance Your Additive Manufacturing with Polymaker ASA Filament 2
img 2 attached to 🔧 Enhance Your Additive Manufacturing with Polymaker ASA Filament 2
img 3 attached to 🔧 Enhance Your Additive Manufacturing with Polymaker ASA Filament 2
img 4 attached to 🔧 Enhance Your Additive Manufacturing with Polymaker ASA Filament 2

Description of 🔧 Enhance Your Additive Manufacturing with Polymaker ASA Filament 2

⛅ 【Weather Resistant】 - PolyLite ASA UV filament has all the properties of 3D filament ABS with the additional features of being weather resistant. Our ASA is UV resistance and resistant to environmental stress cracking. PolyLite ASA can be used outdoor for outside application such as gardening tools or car accessories. 🌡 ️【High Heat Resistance and Mechanical Properties】 - PolyLite ASA can resist temperatures up to 100 ̊C (212°F) and display high toughness and impact resistance for functional application. ( Same properties as 3D printer filament ABS ). 🔮 【Matte finish】 - PolyLite ASA Red is a 3D filament ASA with a very special matte finish which makes the final print look very smooth and high quality. (Matter surface than regular 3D ABS Red Filament ) - Note: turn off the fan for better mechanical properties, turn it on at 30% for higher print quality. Selected color: Red ASA filament 2.85mm ( similar to Red ABS filament 2.85mm ). ⚙️ 【Printing Settings】 - Nozzle: 250 ̊C; Bed: 90 ̊C; Speed: 50mm/s (Settings can be adjusted depending on the 3D printer, you can refer to the 3d printer abs 2.85mm filament settings) To print large parts without warping issue, we recommend using an enclosed printer to maintain a warm enviroment around the print. Using BuildTak or Magigoo can help with the bed adhesion. ⚠️ 【Important Note】 - Please make sure to double check the diameter of your order as it may automatically change when selecting a color. Selected diameter: Red ASA filament 2.85 ( similar to Red ABS filament 2.85 ). 🛡 ️【Risk Free & Lifetime Technical Support】 - We offer a full refund if the product is not performing as expected. Polymaker ASA filament is designed for outdoor functional application. Let us help you get your perfect beatiful prints and contact us via Amazon anytime you need.

Reviews

Global ratings 3
  • 5
    0
  • 4
    1
  • 3
    0
  • 2
    0
  • 1
    2

Type of review

Revainrating 1 out of 5

Won't stick to bed

Tried this ASA brand as my regular brand was out of stock. It didn't stick to the bed at all. I've tried it on a smooth and textured print bed, I've tried with and without glue and it still didn't stick properly. I cannot rate the quality of the print as all prints failed by about 10%.

Pros
  • Matte finish
Cons
  • Could have chosen a newer model

ASA is my main filament. I've bought every Polymaker ASA color except white and will likely do so when another brand's current roll runs out. All in all, these filaments can be printed without any problems on my FLSun QQ-S Pro with a closed and heatable build chamber. They print consistently: bed at 75°C, nozzle at 255°C, chamber at 45°C. Good ventilation or a VOC scrubber is recommended as these threads emit a distinctive odor. The only issue I can document is their tendency to unravel easily…

Pros
  • Print Settings
Cons
  • Sparse Instructions

Revainrating 1 out of 5

Breach of contract for me

I purchased an ASA Polylite spool specifically for printing some heat resistant parts to restore the hot end of my printer. The thread seems to be everything I could wish for. (Apart from the tendency to stick to the PEI coating on the build plate.) My problem isn't with the ASA filament, it's with the spool. A spool of thread fell off my workbench in my garage. The spool is broken. Now it can't be used on my spool holders. Maybe it's my age, but over the years I've dropped a few coils and the…

Pros
  • Important Notice
Cons
  • Miscellaneous Miscellaneous