🔌 Pack of 20 Rannb Carbon Brushes for Electric Motors Spare Part Repair, 12x8x5mm Review

Ordered by brush size. However, this was not an exact match for the specific brand of angle grinder I own. There should be a groove on one edge that wasn't there, but it's easy enough to do. The springs didn't fit. I ended up replacing it with a ballpoint pen. I confess I didn't really order an exact replacement part for my engine. I had to adjust it.

I bought these to repair my Harbor Freight Drill Master 6 inch cut-off saw. 61204, 41453, 69438, 61659, 56522, 61239. The original brushes fell apart the second or third time I used the saw. I couldn't find any part numbers or descriptions online, and the original brushes were taken apart and thrown away. I measured the holes and adjusted these brushes. I put these brushes in and the saw works again and sounds better than new.

Nothing to say just a lot, they fit perfectly. the order came quickly. All 10 of them were the same price as one of the branded items and they look the same. worried that 10 of them will be cheap and useless. Don't worry, these things look just like the old ones I received. I have several of the same sharpened tools and use them quite often, it's very valuable.

A little background; I have a corded 1/4 blade sander that I used once when it started sounding like a cordless sander when the battery was low. The next time I turned it on after about 30 seconds it didn't start. It's not that old, but it's no longer guaranteed, so I took it apart and found that one of the carbon brushes was almost worn out, while the other still looked like new. I repositioned the brushes, reassembled the grinder, turned it on and it worked like new again. The original parts…