🔧 Rough Country 2" Leveling Kit for 1994-2008 Ram 1500 2WD - 7578: Enhance your Ram's Performance and Aesthetics with this Reliable Leveling Kit Review

This drastically changes the look of the truck. This will get rid of the ugly rake and put it in the right position. I installed the kit and then bought Fuel Hostage rims with 285/70/17 mud tires.

Installed on my 98th Dodge Ram 1500 5.9L 2wd. Absolutely LOVE the position he gave! The upper ball joint, tie rod end, brake caliper and stabilizer bar must be removed for installation. I did this process myself and it took me about 6 hours because it's my first time doing something like this.

Easy to install, just take your time and do a little research first. Installed on a 2004 Dodge quad with a 2WD cab, the difference is huge - not quite "level" but very close. I like the look of the truck once installed - I think it should look like this from the factory. I also took the truck and adjusted it after installation.

Excellent product! Arrived on time and love the 2ft tall window decal it came with! A 2 hour job turned into an 8 hour job due to rusty nuts and bolts, but it's worth the purchase! Just know what you're getting into and make sure to use WD40 the night before to loosen your nuts. Overall, ioft gave me almost 3 inches, which made me very happy!

Great product so far! Without fittings (screws or nuts). All you have to do is slide it over the spool and you're done. I have a 2005 Dodge Ram 1500 2WD. I have stock shocks and they don't play much. I can go over small bumps, but if I go over a big bump or a hole in the rock, I can feel my truck buckle under the impact. Hard pulling sensation. My take is to install aligned (2 inch) shocks and just remove the stalks.

My friend and I got to work late one night and put everything back together in a few hours. Removing the top A-arm was the hardest part (hint, get a BIG hammer and a really big pry bar!) Came in like a charm, you don't have to remove everything as the instructions say, just the top spindle nut separate from the mother. upper arm and allow it to hang by loosening the arm nuts on the frame, it pivots enough to insert the spacer and spring back. After installation, the stock shock is NOT long…