🔩 25-Pack S31MG280 Steel Pre-Bulbed Shank Rivet-NUT with Gold Zinc Finish, 5/16-18 X .020-.280 Grip Range Review

These nuts were used a lot when assembling my van. I suggest you use a good tool - the DIY approach can be time consuming. Regular nut tightening tools won't work - you need a longer mandrel. If there was a drill attachment, I would love to use it.

This appears to be a good heavy duty anchor but the Astro 1442 air nut thread setting tool advertised with the anchor will not set the anchor. The anchor rod is too long to be hooked with the tool. Fortunately, 8 shorter anchors were included with the Astro-Tool. But now I don't know what tool I need to work with these anchors. And this tool kit costs $70!

Used to mount a 4 gallon tank to a 1/4" aluminum deck. If you have access to the rear, install (2) Nuts and Bolts Thread the nut onto the bolt, thread the bolt through the rivet, lower it into the hole, use the last nut on the end of the bolt to secure the rivet to the bolt to keep it from moving Turns.Hold the screw to hold it in place and turn the top nut to pull the screw up and set the rivet.When installing blinds, use an impact wrench and a well lined one Bolt under consideration The force

These were used a lot on my van assembly. I suggest you use a good tool - the DIY approach can be time consuming. Regular nut tightening tools won't work - you need a longer mandrel. If there was a drill attachment, I would love to use it.

Looks like a good heavy duty anchor, but the Astro Nut Thread Installer Pneumatic 1442 advertised with the anchor will not install an anchor. The anchor rod is too long to be hooked with the tool. Fortunately, 8 shorter anchors were included with the Astro-Tool. But now I don't know what tool I need to work with these anchors. And this tool kit costs $70!

For mounting a 4 gallon tank to a 1/4" aluminum deck. If you have access to the rear, install (2) nuts and bolts. Screw the Nut onto the bolt, thread the bolt through the rivet, lower it into the hole, use the last nut on the end of the bolt to secure the rivet to the bolt to keep it from turning, hold the bolt in place to hold them in place and turn the top nut to pull the bolt up and set the rivet.When installing blinds, consider an impact wrench and a well-lined bolt.The strength of the…