🚰 Safety Siphon - The Original Self-Priming Pump for Multiple Uses By The Original Safety Siphon - 6-Foot High-Quality Hose, 1/2" Valve Review

Handy tool for home or shop! If you're not familiar with how it works (like I was when I first discovered it) - the metal end acts like a check valve - or one-way valve - push water into the hose by shaking the metal end. The ball inside prevents backflow and eventually fills the hose up enough that gravity causes downward flow/siphoning from one end to the other. The greater the difference in elevation, the better from one end to the other. I have several of these - I have one at home for…

Just used this to transfer a 5 gallon can of petrol to my latest model car, worked quickly and perfectly. I didn't spill a single drop and probably only left about 1/4 cup in the glass after lifting it at an angle when it was almost empty. I was concerned that the plastic tubing (vinyl or other material) might not be stiff enough to go through the anti-siphon/tilt valve in the tank's "fill tube", but that wasn't a problem at all. There was also concern that a brittle tubing material would…

This review is for those pumping petrol from CARB compatible LPG tanks. They're a frustrated bunch forced to manipulate 40-pound, 5-gallon gas canisters to try and get the CARB nozzles to open and allow refueling. These new nozzles were designed to reduce hydrocarbon emissions, but they do exactly the opposite. CARB injectors are very difficult to use and actually result in more gas leaks than the old system. These cheap plastic nozzles are not designed to withstand a 40 pound side load…