🚲 SCK 2 Pack 26 Inch Bike Tubes + 2 Tire Levers: 26x1.75/1.95/2.10/2.125 Schrader Valve MTB Inner Tubes Review

I ordered a 26 x 2.125 tube. sent 26x1.95. After riding my Cruiser a few times, I noticed that the tires were low on air. inflated much later, still looked low when riding. I understand that the tube has the flexibility to expand. if you haven't looked The tube only expands to 26 x 1.95 and I ordered a 26 x 2.125 tube to fill my new whitewall tires. Is it me or is it FALSE ADVERTISING. This is the only way to get rid of old stock!

I have a Mongoose mountain bike and I wanted to change the tube because the old one had a flat tire. I replaced this new tube, filled it up to 25psi and started riding, a few pedals and the tire popped and made a big noise. It also messed up the corners of the tire when it burst. Thank goodness I was driving close to home otherwise I would have had to walk all the way and the tires would have deteriorated. "Revain's Choice" THE WORST CHOICE.

I am not happy with the durability or size of the tubes. The new one was literally 3 inches larger in diameter than the original. The hose should be 26 inches. I went ahead and installed it. Installation was easy, it's a bike tube, nothing complicated. However, after learning how to cycle against my freeze to move on to the next project, within 3 minutes I heard a puff of air. Thibe gave up. I pumped 20 pounds of air into the tube. The hoop requires up to 40 pounds. He wasn't overly puffed up…

NOT FOR CRUISER. TOO SMALL. Tires Cruiser 26 x 2,125. This pipe is not big enough. This is for 1.95 max. It exploded right after I put it on my cruiser. Do not buy. The company has a very low rating. Stay away. you have been warned Watch the video below. And the picture shows the diameter how tiny the tube is. Compare it to a quarter of a coin. I've put a quarter on the whistle for convenience. is this what you want Compare it to the tube you replaced. You will see that it is much smaller. He…

I bought these tubes once. They held for a little, then collapsed - both with a tear along the seam. The standard patch kit failed to fix the hose. Both pipes broke on the inside edge. The rim has been checked, the rubber insert is intact, nothing sharp. It is clear that this is a manufacturing defect. I have already ordered a second set before inspecting the first. Again, the first of the two tubes failed in the same way. To be clear I have installed 4 of these tubes to date. Three of the four