🚘 Enhance Your Toyota 4Runner TRD Pro Grille with Seven Sparta 4 PCS Led Amber Lights - 2014-2021 Models (Amber) Review

I have a 2021 SR5 Premium and wasn't sure if they would work but they do! On the new 4Runners, the bar is at the top next to the badge, so it won't fit on the top of the grille, but it will fit on the underside. I think they look great! Ease of installation.

I chose white to match my upgraded high and low beam LEDs. Installation was easy, just unplug the 10A fuse from the INJ, plug it into the rescue plug and reinstall it into the original INJ slot in the fuse box, no drilling or cutting required, you can easily take the fuse box with you cover with a lid! This is one of those tasteful little updates that add even more style to 4Runner! Get it and enjoy! :)

Solid product. Really easy to install. All in all it took about 20-30 minutes. The headlights snap perfectly into the grille (if not, flip them over). Use zip ties to secure the wires together and secure them to the frame. Ground it to an existing ground point near the fuse box and remove the 10A fuse for the headlights and replace with a 15A jumper for the lights. Using a drill, make a tiny hole in the fuse box base and cover to ensure a secure fit for the wire without pinching it.

Very easy to install. I used the engine compartment fuse box installation method and it took about an hour and it took my time. Most of that was spent removing and replacing the grill access cover. They are well made and work/look good. I'll probably go back and reset the connection so they only turn on when I turn on the light. Now they are on when my key is in the "on" position. A simple and easy modification if I recommend it to anyone trying to "beautify" their SUV.

I bought this for my 2020 TRD Offroad. The lights didn't come with instructions, but that didn't really matter as there are plenty of videos online on how to install them. For the 2020 model I had to install around the sensor and the headlights didn't fit exactly like I imagine at 19" and under. I had to use small 4" zip ties to attach the lights to the grille. The straps fit perfectly and aren't flashy. I believe there is another review by someone who uses zip ties that shows a photo of where…

It took me forever to get here but the price was worth it. It actually fits the 2020 SR5 and possibly earlier models with one tie rod per bulb. Simply wrap the zip tie around the bottom of the lamp bracket so that the square head of the zip tie is directly behind it as shown. It is firmly clamped between the back of the lamp holder and the grille. You will of course need to remove the top plastic cover to access the back of the grill before you begin. There are many videos online showing how to

The product itself has 5 stars but I had a small problem. I literally took 4 steps and then turned the key just enough to turn on the light and saw that it worked. After closing everything I tried to start my 4runner but it wouldn't start! So I was like WTF?! I put the original 10 fuse back into the INJ socket in the engine compartment fuse box. My 4runner started, but then the check engine light, TRAC OFF, and the Multi-Terrain Disabled message came on. So WTF even more! Eventually it went…

Pros: They look fantastic. Relatively easy to install. Seems well done. I hooked mine up to the fuse box in the cab. I cut a hole in the rubber stopper in the firewall to keep the wires secure and water out. Used a zip tie taped to the wiring and it slipped right through the hole in the firewall. The headlights mount directly to my SR5 grille with the Toyota symbol in the centre. Cons: The fuse protrudes significantly from the fuse box, but I only cut a valve in the fuse box cover so it's not a

AVOID FLYING THROUGH THE FIREWALL: I didn't like the fact that most instructions say the power cords should be routed all the way to the driver's pedal. So I found a cleaner way to do it. Read below. There are many videos on the internet about the installation of this particular product. The lights snap on, so very quickly. I was able to hook it up to the fuse box under the hood. Remove the cover of your truck's underhood fuse box and locate the INJ fuse on the diagram printed on the inside of…