DANCO VersiTech Black Cartridge for GLACIER BAY Tub and Shower Faucets (10773) Review

I ordered this part in March 2017 because my hot water barely came out when I ran my bath or shower. It's August 2017 and I have the same problem! I'm not sure if the part I originally ordered was faulty, but I definitely had no intention of making this purchase again in the next 5 months! The product is broken, so I have to order a new one. hope it works better!

i am on my third such device in three years and this one is also leaking. Unfortunately I'm stuck with this cartridge unless I rip out my tile and completely replace the entire assembly. If I had to do it again, I would choose. I have not used the Glacier Bay POS faucet. Lesson learned the hard way. If you're reading this and thinking about saving some money on your faucet and buying a cheap Glacier Bay faucet, think again. You have to buy cheap DANCO parts OR rip out the tiles and start over…

In my attached pictures you can see the old cartridge that was replaced on my AquaSource/Lowe valve (part number not visible). We didn't notice, but the seals on the old cartridge that were bumping against the valve had come loose and this made a horrible, constant pop when the water was hot, but the water never got too hot (even with hot/cold aisles). ). in the optimal position). We thought it was a pipe problem. We ended up replacing the cartridge when the shower head started leaking and all…

Mine was brought to me with the problem of not being able to turn off the water in the shower after installation. As a previous reviewer said, it will always leak, albeit more slowly, when in the off position. I've tried thoroughly cleaning the brass body that the cartridge fits into with vinegar to break up any mineral deposits that might interfere with the seal on the back, but that didn't help. Eventually (after too much time) I found out that it was possible to pull out the water inlets on…

This was the second replacement I tried. The first was too short, and the specs on the website didn't provide exact dimensions. This is ideal for replacing the Aqua Source shower cartridge with a total length of 5 1/2 inches and a diameter of 40 millimeters. You will need to turn off the main water source and remove the cartridge to see the correct length and diameter to get the correct cartridge to fit your current shower faucet. I'm not a plumber and my house technician said it would cost me…