In its price category, this case is an absolute top. 4 supplied fans, quite quiet, two of which can be connected to the built-in reobus, operating in two modes (low and hight). Looks strong and effective. I assembled the system on it quite quickly, Pros below: The main advantage of this case at the present time (end of 2022) is the price. Complete 4 fans and at the same time noiselessness in operation. Window on the side wall. The bottom location of the PSU. Fits large graphics cards up to…

On shortcomings: USB - devices fall off. Geez how does that happen. PCI plugs break out, and very reluctantly. Cable management is very lame - by connecting the drives it breaks the SATA cable, I had to remove the side wall. I never figured out how to install 2.5 media. I put the second valve on the front wall - the temperature of the hards has not changed. In general, nice corps for their hard-earned money.

Just now, once again pushing the system unit, I broke off the leg. She just missed the 1.5mm rounded obstacle. This prompted me to write a comment. Yes, and I also broke off the fasteners of the outer plastic lining. Tellingly, in the closing process, it's my fault. Its pros: Appearance, in particular the window Latches in 3.5" bays Availability of complete fans, one of which is backlit Two walls are removed, and the fasteners can be unscrewed by hand Comes with enough screws and a few…

A case that has everything you need for an average user, I personally don’t have enough space for wires, but everything depends on the straightness of my hands, I’m not lucky Some pros: Enough space for any average and even more PC, both for a good cooler and for a long video card, 4 coolers in a set, strong enough, well ventilated, the presence of a filter in the front Its cons: Little things but: why not put 2 fans at once for blowing? Without this, it is rather weakly blown, after installing

Excellent box, bought 4 years ago, everything suits. I like its excellent ventilation and the fact that there is an iron mesh from the front and not glass, which can be easily removed when cleaning, behind the mesh a foam pad for collecting dust so that it does not get inside, the foam pad is gently washed under running water and dried for 10 minutes and voila is clean, but very gentle vacuuming I do not advise you to tear it .! On the front panel there are 3 usb and a button for the speed of…

For me, the side window isn't critical at all, whether it's solid or partial (as in this model), glass or acrylic - I always keep the PC in a state-of-no-sidewall. What I advise everyone: the temperature is 5-7 degrees less than with her. Yes, and access to the filling is easier. This is not vintage high-end technology, where aesthetics are paramount. And specifically this case - I was pleased with both the size and the presence of 4 vents, and blowing. There are jambs with cable management…

For my money - 2022 - a chic building. Pros below: spacious, 4 case fans - cooling in the case is well thought out, it costs intel i5 4570 with a CoolerMaster s200 cooler (I also recommend it, I took it for 650) - idle temperature is 19-20 degrees. Blue backlight. The metal is processed - do not cut yourself. Cons: in the case from the bottom up there is a rod to support large-sized video cards, it is screwed from the bottom and top, it did not unscrew from the top, fortunately, it bends…

Despite all the disadvantages of the case as a whole, I like it, because for the money that I paid for it, I did not find anything similar to it both in functionality and design. With its pros: 1. 2xUSB 2.0, 1xUSB 3.0 on the front panel. USB 3.0 connects to mat. board, and not on the , as done about the Zalman z5, the wire goes beyond the case and is already there connected to the back panel of the mat. fees; 2. Up to 4 case coolers can be installed, also at the bottom with 5 drills; 3. Lower

The case is slightly shorter than my previous one, so I attribute the size to the minuses. Those who write that the building is spacious are wrong. The case is a little cramped - the ATX board fits back to back, the wires on the back wall had to be distributed very carefully so that the lid closed. There are 4 fans on board, plus on the cooler and in the power supply - it turns out quite noisy. The fan speed control button, if it works, is not noticeable to me. There are enough bolts with a…

Used to build a budget computer with an eye on the future. My first assembly - everything turned out to be very simple. 4 coolers are easy to connect to any motherboard. On my mATX, there is only one 3-pin for the case cooler, but the front one is connected only to the power supply, and the top two - to the connectors from the controller for their rotation speed, the controller itself - to the power supply: as a result, the speed is constant in the front, regulated by the system in the back…

In general, I am satisfied with the case for this money. I think one upper cooler is enough, but the sediment remains. the latches on the covers look strong, but in fact it turned out to be easy to remove them without breaking them to replace the cooler and clean the dust. in fact, the included front panel does not look very good. it's all mesh. And another tip - do not abruptly tear the film from the window. I pulled and in the place where the film firmly stuck to the window, a white speck…

I bought a Zalman Z3 Plus case in August of this year to replace the old one, assembled a computer, and everything seems to be fine, but I forgot to check the front panel. A month later, it means that I connected the headphones, and ran into a problem: the sound from the front panel is output with strong distortion, and in different operating systems. At first I wanted to hand over the entire case under warranty, but the check got lost somewhere, and I didn’t want to carry the computer 250 km…

I purchased the case in December 2022. At the moment (July 2022) it is in a rather shabby state. I do not advise you to often remove the front panel, the clips will not survive this, just once again touch the plugs of the front panel, because you will not stick them back later. Soon after the purchase, I realized that I would not buy cases from Zalman, for me they are uncomfortable, I'll take something simpler.

In general, not bad, but as for Zalman, he is somehow a little Chinese and not Korean Has pros: Not bad design Well blows out all the heat (especially when everything is from AMD, as in my case) A video card 30 cm long flew in with ease I also liked that the power supply is cooled regardless of the case. Cons below: Very upset side glass, or rather plastic. which was scratched after the first wipe. And not cowards, but from fiber. There is somehow not enough space for laying wires, and there…

Quite a body. There are not enough stars, but everything suits. In general, I would not write, if not one "but": The system unit worked for 7 months in a VERY dusty room. Flakes of dust lay right around him. Dismantling for cleaning, I expected to see "the insides of a used vacuum cleaner bag", but I saw coolers, a motherboard, . as if just out of the package. 3-4 day old dust on the video card, and the bottom of the case. The only place clogged with the expected amount of dust is the filter…

I think so, if all the cases are of approximately the same quality and appearance, except for the frank "Chinese", you need to choose by price and by the size of the space for the video card, this one is ideal in this ratio With its pros: It doesn't look fancy. Finished edges. Normal price. Huge space for a video card, as much as 360mm.! Support for the video card (the bar is attached to the case, with adjustable supports for 2 video cards), there are filter elements in front and below that

I'm not really in cases, every time I change the computer (every 6-8 years) I take a new one. Now I bought this one when assembling a new system. I liked everything, especially the ventilation, before my AMD in the previous case kept such heat inside that it was possible to warm the mammoth from the Mesozoic, but now all the heat is successfully drawn out. Moreover, most of it is just two top fans, the front fan works sensibly for air intake - you put your hand on it - it's cool.

In general, the case is excellent, I did not regret that I bought it. Fully justifies its price. I'm using a backlit motherboard and the light from the front fan is bouncing off the CPU cooler. Together with silver SATA and silver SS, as well as glossy RAM heatsinks, it all looks chic (at night). Got pros: Design. Dimensions (moderately large). Glass on the left. Cooling at the highest level. The upper coolers are connected to the PSU if they are run through a rheostat. Useful for owners of…

What we have: a decent discreet appearance, 4 white quiet coolers in the kit, two places for a 120mm cooler on the front panel, an additional rack for an 80mm cooler for a video card, the correct shape of the window. Its budget price allows it to forgive small jambs: no rubber feet, no rubber seals on the sled for hard drives, tight panel latches without removable filters.

I noticed this case a couple of years ago when it went on sale. Before I bought it for myself, I made more than 10 assemblies on it. I can say with confidence that it has no competitors not only in its price range, but also in a higher one. If you are still in doubt whether to take it or not, do not hesitate - take it. Has some pros: Compact, which does not affect the size of the installed hardware, whether it is a video card or a cooler. 4 quiet fans included, 2 of which can be installed on a…