🛠️ Scanners & Testers
6 Review
BUNDLE INCLUDES: Walabot DIY Plus Advanced Wall Scanner and Stud Finder for Android Smartphones with Walabot Official DIY Protective Case and 8-Piece Accessory Kit. IDEAL FOR: The Walabot DIY Plus Advanced Wall Scanner is the perfect instrument for detecting wooden studs, metal studs, pipes, wires, and movement. SENSING MODES: It provides 3 different…
Read more about this product
6 Review
Great Tools: They are great tools for applications such as production verification, engineering testing, and DIYers. UT658 Series: UT658 measures output voltage, current, energy, capacitance, circuit equivalent resistance, D + and D-voltage of USB data cable, and more. Protection: Monitor charging efficiency at any time to protect charging equipment…
Read more about this product
6 Review
More than 1 device could be monitored, assuring more measurement safety. Functioning as multimeter + datalogger. Offline record function,smart voice-reading accessible. 4(1/2)-digit counterparts. Bluetooth 4.0 version - supports mobile device with Android 4.3 or above / iOS 7.0 or above OS, and equipped with ble 4.0 module.
6 Review
Backlit LCD display for accurate voltage readouts. Small ergonomic design for easy use in confined areas. Computer safe (10-17mA draw), for use on cars boats trailers vans RV's motorcycles airplanes and snowmobiles. Needle-sharp stainless steel probe allows for easy piercing. Use to check electrical circuits and accessories on all 3-48 volt systems.
6 Review
➤【6-in-1 Wall Scanner】 The VIVREAL stud finder with digital level provides 5 scanning modes and digital level. The stud mode is for finding and locating the wood and metal studs in drywall up to 1/2"(13mm) deep & 1"(25mm). DEEP mode is for 1.5"(38mm) deep studs. Metal mode is for locating metal up to 2.36" (60 mm) deep. And AC wires scan is for locating…
Read more about this product
6 Review
Dual sensitivity. LED light with 100,000 hour life. Detects from 90 to 600 V AC. Rated to CAT IV 600 V. Dual levels of detection.
6 Review
【MULTIFUNCTIONAL TOOL】: Support quick charger recognition; data wire resistance value testing; QC2.0/QC3.0, Voltage/Current/Power Detection; data store; cable impedance measurement. Automatically recognize QC multiple protocols such as PD QC2.0 QC3.0/4.0 MTK. Allows you to check the charging performance of the output wall/car/solar panel chargers and…
Read more about this product
6 Review
Stanley - Black & Decker. Base of the stud finder is notched for convenient marking once studs are located. Limited Lifetime Warranty. Magnet works by locating steel nails and screws used to hold drywall to studs. Base of the stud finder is notched for convenient marking once studs are located. Limited Lifetime Warranty.
6 Review
★【Excellent Quality】Digital Voltmeter DC 0-100V 0.36 Inch Three-Wire Voltage Tester Meter,Install the hole: 23 * 14.2 mm. ★【Detecting Voltage】DC0-100V; Operating Voltage: 4.0-30V; Working Current: <20 mA; Detection Rate: ≥ 200 mS/Times;Accuracy: 3‰(+/- 1 word);Operating temperature: -10 ~ +65 °C. ★【Protection Design】Reverse Polarity Protection,The meter…
Read more about this product
6 Review
Package Included: The refrigerator thermometer includes 1 indoor temperature built-in the indoor console and 2 wireless remote sensors, which can monitor 3 kinds of temperature and all displayed simultaneously, MAX and MIN temperature records of past 24 hours for home indoor, outdoor and fridge. Wide Temperature Range: Outdoor -40°F to 140°F (-40°C to…
Read more about this product
6 Review
Temperature range: -50 ~ 1350 °C (-58 ~ 2462°F) ,Temperature unit °C, °F, K switchable. Max/Min/Avg reading recording function. Large display with backlight,Data HOLD Function,Auto power off setup. Displays 4 different temperatures ;Temperature 1,Temperature 2,Temperature 3,Temperature 4. It has a wide range of applications in Ovens, Furnaces, Ceramics…
Read more about this product
6 Review
Complete set of connector types standard (telephone, LAN and Coax). Nested remote allows end-to-end testing of all wiring types. Simple testing of LAN wiring and phone lines. Detection of common wiring and connector errors. One year limited warranty.
6 Review
Easy reading: LCD Digital display. Easy to carry: In Light weight and small size. Unit Display: Lb / Kg / N , The max. Load value: 500N/ 50kg/ 110Lb. Load Value: 0.1N/ 0.01KG/ 0.01Lb , Precision: ±0.5% , The min.value:5N/0.51kg/1.12Lb. Battery Life: >= 300 times.
6 Review
9~12 adjustable resolution ,the power supply range is 3.0V-5.5V. The probe uses the DS18B20 temperature sensor chip for good sealing performance, allowing for high sensitivity and minimal temperature delay. DS18b20 sensor stainless steel housing of 6 * 50mm and Lead length of 1m. Ability to cold storage temperature monitoring and environmental monitoring…
Read more about this product
6 Review
Detection: The Bosch GMS120 Digital Wall Scanner features multi-mode laser detection for wood studs, metal objects (rebar, studs and steel/copper pipes) and live wiring. Performance: Features the latest 3 sensor laser technology, offering a wide range of detection performance of up to 4 3/4 inches deep in cured concrete, up to 2 inches for live wiring…
Read more about this product
6 Review
1⃣Non-Contact & Safe Voltage Tester - The entire enclosure is an insulator, so you don't have to worry about him passing voltage to your body; Testing can be achieved without physical contact for its NCV Inductive Probe✅. 2⃣Adjustable Sensitivity & Dual Range Testing - To reach different test environments, you need to adjust the sensitivity; Press the S…
Read more about this product
6 Review
For detecting NPN and PNP transistor, capacitor, resistor, diode, triode, N-channel and P-channel MOSFET, IGBT, JFET, triac and battery, etc. Can also be used to detect infrared wave forms. After detection, align the infrared remote control with the "IR" light, then press the button in the remote control, if the detector successfully decode it, it will…
Read more about this product
6 Review
Measures insulation resistance up to 2000M. 250V, 500V and 1000VDC test voltages. Measures AC voltage up to 750V and DC voltage up to 1000V. Continuity and 200 and 200k resistance ranges. Dual backlit LCD display test voltage and insulation resistance.
6 Review
BME280 is a precision sensor, is soldered onto PCB. Not only the pressure and the temperature, this sensor can measure humidity. It uses both I2C and SPI (supports 3-, 4-wire SPI) interface. With an I2C connection you have access to enough weather data to make some pretty good predictions for your local area. It is made up of a very accurate pressure…
Read more about this product
6 Review
OctagonStar Circuit Tester. OctagonStar Quality Assurance.