🔧 Steering & Suspension Tools
8 Review
Ball Joint Adapter Update Kit for select Ford vehicles. Must be used in conjunction with an OTC Ball Joint Press and other OTC ball joint tools to perform a complete ball joint replacement - this set is for installation only. Set includes: (38355A) Installing Cup, (531739) Receiving Cup, and (204508A) Receiving Cup. Works with select Ford Trucks…
Read more about this product
8 Review
SPECIFICATIONS: This Master Wheel Hub and Bearing Installation and Removal Kit includes the following: one Center Screw and Thrust Bearing Assembly, one Bracket Assembly, one Elongated Nut, three Horseshoe Adapters, one Support Disc, nine Pusher Washers, four Receiver Sleeves, and one convenient, blow-molded plastic storage case. DESIGN CONSIDERATIONS…
Read more about this product
8 Review
PROBLEM SOLVER GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life. STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength. ABSORBS IMPACT -- Belleville preload washer helps…
Read more about this product
7 Review
The long socket slips over tie rod end and crows footengages on socket for easy removal and installation of tierods with inaccessible wrench flats. Includes 12 crowsfeet, sizes 1-3/16", 1-1/4", 1-3/8", 1-1/2", 1-5/16", 1-7/16", 29mm,32.5mm, 33.6mm, 38.4mm, 40mm and 42mm. fits many cars, trucks and SUVs. fit type: Vehicle Specific.
7 Review
Heavy Duty 11-1/2” Strut Spring Compressor Tool – Set of 2 (Pair) – MacPherson Spring Compression, 13/16” Socket 1/2" Drive to compress the coil spring to replace the shock absorber unit or spring; For repairs on bent struts, strut tubes, and damaged pieces; Easy and super-fast setup; Attach the brackets completely onto the spring, tighten, and remove…
Read more about this product
7 Review
Use on — For 1998-2004 Ford F-250 F-350 F-450 and F-550 4X4s having the vacuum-operated front axle. Similar to the Ford Tool 205-830,OTC 6695. High Quality — Integral steel construction with black oxide finish resisting rust and impact, provides much longer service life. Effect — Prevents front hub vacuum leaks that would cause the 4WD to not engage…
Read more about this product
7 Review
Use with the OTC 7249 ball joint set to remove or install aftermarket and original equipment upper and lower ball joints. Removes and installs the offset ball joints used to change caster/camber. Works with 1984-newer "downsized" Jeep Wagoneer, and 2WD and 4WD Cherokee and Comanche; 1987-newer Jeep Wrangler; 1990-newer Jeep Renegade; 1993-newer Jeep…
Read more about this product
7 Review
[APPLICATION] : This front end service tool allows for easy removal of most popular types of pitman arms, Tie Rods and Ball Joints. [FEATURES] : Press type ball joint separator allows for ball joint removal without damage to boots and other part. [ALL IN ONE] : This Ball Joint Separator, Pitman Arm Puller Comes with 1x Ball Joint Separator, 1x Tie Rod…
Read more about this product
7 Review
Durable adapters made of steel with heavy duty plastic case. Replace wheel bearings while keeping the steering knuckle and strut assembled in tact on the vehicle. No more need for front end alignment after service work. Packaged in a custom case for easy storage and transportation. For front wheel drive cars and small trucks.
7 Review
This tool is used to separate the ball joint from the spindle support arm. It works on many domestic and import front wheel drive vehicles. Is adjustable up to 2" for different size ball joints.
7 Review
STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength. GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants. EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit…
Read more about this product
7 Review
STRONG AND DURABLE: Shankly’s coil spring compressor has a drop forged enamel body and is composed of top quality materials, giving the mechanic confidence spring compressor jobs will be done right. MAKES SPRING COMPRESSION SAFER: Compressing struts and springs can be dangerous. Shankly’s strut spring compressor features double ended jaws with…
Read more about this product
7 Review
package Dimensions: 10.795 cms (L) x 17.805 cms (W) x 27.406 cms (H). Package Quantity: 1. Product Type: Auto Accessory. Country Of Origin: China.
7 Review
For separating ball joint from steering knuckle. Drop-forged, heat-treated alloy steel wedge tool. Separates ball joint from steering knuckle. Drop-forged, heat-treated alloy steel wedge tool. 5/16 inch tine opening.
7 Review
Manufacturer: OTC. Auto & Truck Maintenance. Country of manufacture: United States. Part number: 7080.
7 Review
[No More Hammer or Shop Press]: The ABN Master Wheel Bearing Removal Tool and Wheel Hub Puller Tool Kit allows you to remove and install wheel hub and bearing assemblies as well as inner bearings without the use of a less safe hammer or shop press. [Fits Your Vehicle]: Universal for front, rear, and all-wheel drive vehicles with independent suspension…
Read more about this product
7 Review
This 20+ adapter kit covers many Truck/Van/SUV applications and some car applications. With the majority of Cars and Truck/Van/SUV applications having press-in ball joints and universal joints, this kit is designed to service many of those applications. This kit is a combination of 7249, 7918, and 7996 kits, and includes 20+ adapters, C-Frame, Ball…
Read more about this product
7 Review
The unversal compressor tool for struts features rugged and durable frames, reducing bending and warping even under high tension. Strut spring compressors bear an impressive 1200 kg maximum capacity per pair. This strut spring compressors feature lower security jaws, adjustable safety bars and a safety guard to reduce work site perils. Avoid strut…
Read more about this product
7 Review
19 adapters included to remove and install ball joints. Works on upper and lower ball joints on 1996-2008 Honda, and Acura cars with press in ball joints. Vehicle application chart and diagrams included. Does not include the 7248 C-frame press.
7 Review
OTC's Ford Cam Pulley Holding Tool is a 'must have' for ensuring both cams stay in sync when belt is disconnected for replacement or other procedures which require belt removal. Simply rotate the engine to top-dead-center and slide the precisely sized tool across the lip of the cylinder head into the slots on the back ends of the camshafts to ensure cam…
Read more about this product