🔧 ACDelco GM Original Equipment 15909827 Power Steering Pump - Enhanced Performance and Precision Steering Review

Fits my 2006 Chevy 2500HD 6.6L perfectly. Installation time was 2 hours. A special tool was required - a puller/pulley pusher. I got one for $17 from Harbors loader tool that comes as a kit and has a two-piece cup to wrap around the pulley, a custom bolt, and a bushing to hold the cup together. Without this it would be impossible. So if you plan to do it yourself, which is easy if you have the right tools, I would recommend ordering it here or sending it to the port. This is a NEW acdelco unit,

The original pump has a protruding insert for the hose line to the pulley quite straight. The pump I received is exactly the same except the nozzle is angled towards the pump which made the hose extremely difficult to attach, not to mention rubbing against the mount for the wires going in. I see that it will be very harmful in the future. Can anyone confirm that in their replacement pump they bought, the hose insert (the one that goes around the pulley and comes out as seen in the first…

My 2005 Duramax had an intermittent power steering failure under braking. Investigation has determined that the power steering pump has probably failed. I've read some bad reviews about remanufactured pumps. Additional investigation showed that most pulled the pulley with the pump in the truck, but others left the pulley on the pump and pulled after removing the pump. I recently installed a new radiator and didn't want to risk damaging it, so I decided to remove the pump and pulley as a unit…