PALMEXX 4K UltraHD 3D HDMI Switch: 1x2 HDMI to HDMI/2x1 HDMI to HDMI Review

To switch monitors, press the button five times. sometimes the monitor changes, but the LED shines the same as the previous monitor

I use it in the circuit 2 sources - 1 monitor. I haven't tried it the other way around and probably won't. I will not upload a photo, the device looks exactly like in the picture. The body is metal. Its pros: Works as it should, performs its function without any problems, but not as I would like ideally) Cons: Some circuits on the inactive port (the one that is not currently selected by the switch) are not broken by the button, due to which the source, which is my laptop, starts making noise…

I took it to display a picture from a laptop on a TV and a working monitor. The plastic liner in the package cracked, apparently the box was pressed. The device itself is fine. The body is metal. You press the button (it remains recessed into the case) the signal goes to one channel. You press it again (the button snaps off and sticks out of the case), the signal goes to another channel. At the same time, LED indication works, which channel is working. There is only a nuance, the monitor now…

A convenient thing is that you don’t have to climb at the computer and change the wires in places  I wanted to say that due to marriage you need to call the phone number that you attached in the picture

I connected a PC and a laptop to one monitor through this switch. The switch works, the monitor shows the image from both devices. The button is pressed pleasantly without loud clicks. But just by chance I found this bug: It was useful to disconnect the vga cable from the PC for joy (it transmitted the image to the monitor with such "soap" that the eyes fell out on the table after a couple of hours) and at first I could not understand where the sound from the PC was coming from, despite the…

It didn’t suit me, because I have one monitor 4k, the second full hd. If both monitors are set to full hd mode, then it will work. But if one has 4k mode, and the second has full hd, then when switching from a 4k monitor to a full hd monitor, it shows the "invalid format" error, because. the laptop continues to broadcast a 4k signal without being aware of the switch to a lower resolution monitor.

In general, I am satisfied with the purchase, I bought it because there is 1 working HDMI on the TV, and 2 output devices are Playstation and the Rostelecom set-top box. Switches quickly, the image is normal.