🚦 Blazer C7425 LED Square Trailer Light Kit with Integrated Back-Up Lights, 20-inch Review

The headlights themselves look good but the hardware is not up to standard. The tablet holder ended up in the garbage, as did the connections. But if you want to upgrade the hardware, the light works. I didn't bother with the reversing lights.

This kit comes with a low profile 5 pin harness connector. I'm not sure which country this is for, but it's not the US. Are the lamp housings made of very thin plastic and don't have space to install them? The license plate bracket is plastic and I highly doubt it will support the weight of the license plate.

I needed to replace the headlights on an aging cargo trailer. I didn't need reverse lights, I wanted LEDs. I received the kit and it had everything I needed to easily swap out my existing headlights and add a backup light function to a trailer. They work great, look great and curious that they are BRIGHT! Great deal and great product.

Love these lights! I've loaded them several times with no problems. They are very light and easy to install. Lots of wiring for a 20ft boat trailer. Make sure you have very secure connections though as the LEDs require a full 12V to work, I had some trouble getting one side to work but mostly it was due to how well I connected one of my connections to the side marker lamp crimped.

I had to make modifications to fit the headlights to my trailer. I completely enclosed the light mounts and the license plate light was wider than the cutout. Other than that they are perfect. Lots of brightness and these are the first LED taillights I've had that didn't have to use a pull up resistor to work with my Audi. Many new cars use PWM to check for blown bulbs so the car knows if a trailer is connected to it. They will work with a standard 7 pin to 5 pin adapter.

I've had these lamps for about a month now. So far they make a very high-quality impression. All LEDs are very bright. My only complaint is that the wiring harness could have been a few feet longer. It says it fits "trailers up to 80" wide, which may be the case if you have a trailer that's 12 feet or shorter. I installed them on a 76' x 16' trailer. The wiring harness wouldn't have been long enough, but luckily the 7-pin "wiring block" I used gave me 4 or 5 extra feet, so I didn't have to buy…

This product is great in every way, but the manufacturer chose to make it larger than the standard square size and thinner. Also, they didn't vertically center the mounting studs. If you use light guards or have limited clearance, this product may not be suitable. I have provided images of a standard size square pendant light and this product (trial) in a conventional protective case. You are unlikely to have any problems if you install it directly on your trailer in a wide open area and…