🔧 Enhanced Profile Tensioner Synchronous by Creality Review

As another reviewer also pointed out, the Y-spanner design occupies about 15mm of build space on the Y-axis for me as I rarely build large Prints pieces, but it would be nice if this information was "very" visible in the product description, along with steps on how to get around it. This drove me crazy trying to figure out what was going on with my printer because every time it finished printing I could hear the engine skipping steps which I eventually realized was the Y engine still trying to…

After installing the kit and finishing printing, I heard a strange noise. It was the printer bed that had crashed into the tensioner. I tried moving the tensioner as far back as possible but still lost 10mm of printable area. Which doesn't really matter to me, but it still sucks that it should be mentioned in the description. The build quality is good. There are three ways to solve this problem, the easiest is in Cura by changing the printer settings (Y depth to 225mm); Therefore, all your…

At least once you want something to work right away. Ordered size 2 and 4 spanners (models 2020 and 2040) to fit a Creativity CR-10 S5. The X-axis was pretty straight forward and simple and seemed to fit fairly well (although the strut sticks out about 1cm more, just something to keep in mind if you're short on space). On the Y-axis, attaching the mount itself was fairly easy, but required the use of the original tensioner bolts and nuts rather than the included T-slot nuts. A big…