🖨️ Enhance Your Printing Experience with EPAX Black Printer Resin Printers Review

The prints I've made with this resin seem to have slightly more detail or clarity/definition than the water washable Epax resin I also use have. This resin can be easily cleaned with alcohol. The treatment was simple and uncomplicated. This resin has a stronger smell; The water washable resin smells less than the alcohol I use to clean, it's stronger than the smell of alcohol. Very happy with my first dozen or 15 prints. Excellent resin.

Basically, the best resin for mono screen installations is small. Check the EPAX website for bulk orders. Sonic Mini with 0.05 layers in 3 seconds or 0.03 layers in 2.8 seconds, 70% Epax Hard and 30% Permanent Blend produces phenomenal detail and very durable prints. Much stronger than any other resin, both in the force required to deform and in resistance to deformation. The level of detail is completely independent of the mixing of this mix, it's just magic for miniature printing.

I am impressed with the durability of this resin. Although very complex, it has some flexibility when it counts. I would say that it is quite comparable to PLA or ABS in the most important points. Update: I've noticed that this resin gets pretty brittle after a few days. It's a shame. Docked a star. Avantek Eupheng's high strength resin is the only one I've tested that doesn't become brittle after a while, but unfortunately it's not currently available.

I have an Epax X1-K B/W screen printer. I have only used Siraya Tech Fast Gray (STFG) or another Siraya Tech Blu & Clear resin in the past. This resin works well and prints fine detail, but I'm sticking with STFG. Epax Hard is significantly darker than gray and the pigments peel off quickly even after just 20-30 minutes in the tub. I turn the prints over in the vat to look for bits of misprints that will affect my next print. When you stir Epax you can see the pigment settles to the bottom and…

I don't want to write this review because I want to keep this amazing resin a secret, but I know how hard it is to find a good resin. This material conveys detail like nothing I've ever used before. . It is also the thinnest resin and the strongest. The pictures don't do it justice. I dropped a few pieces on a brick like in the video I posted, I dropped a mini 5 times and I didn't have any breaks. If you want to print any mini, use this material. I used an Elegoo which looks like a press but…

I have an elegoo Saturn printer and an epax x156 printer. Each resin has its strengths and weaknesses. Water soluble resin tends to delaminate easily under pressure or improper support. Standard resin is extremely brittle and very difficult to remove from the build plate. thicken on the FEP during long prints (over 10 hours or so). This resin tends to discolour separately, meaning the color will not retain its consistency throughout the print. In addition, this resin maintains excellent…