🌬️ Frost King A62 36GAH Aluminum: Premium Quality and Durability for Every Weather Review

Easy to apply. The installation of my cordless screwdriver took longer than putting it on. wide enough to cover the shrinkage of an 80 year old

I installed this product about a month ago and have had no problems with it. A draft blew from under the front door and this object stopped it.

This is an excellent seal for the money. At a local hardware store, the price is three times higher. I would suggest replacing the screws with self-drilling ones so you don't have to drill a pilot hole.

The product is well designed, constructed, packaged and easy to install with simple and clear instructions. Installing it on the front door of our laundry room immediately eliminated a long-standing problem with cold drafts. I highly recommend this product.

I cut it down and installed it as a sweeper on a small underground front door in our laundry room (two story house). This is said to reduce cold drafts and keep field mice away from our house in the fall.

I cut this out and installed it as a clean up on a small underground front door in our laundry room (2 story house). This is to reduce cold drafts and deter field mice from entering our home in the fall.

I ordered white for the front door. The product arrived quickly. I had to cut, and I used a small hobby saw with no problems. The metal has 3 pre-punched tiny holes for the included screws. First, use a small drill or nail to make small pilot holes for the screws so the screws go straight in and out easily. I recommend this product unreservedly. I am not being paid to promote this product. Tools Needed: A small hacksaw, a Phillips screwdriver, and a pencil or marker for sizing. Optional: small…

I noticed quite a strong draft coming out of my back door and after some comparisons I settled on this sweeper. I didn't bother drilling the door, preferring that idea to short-lived adhesives. I took the advice of others and bought a cheap hacksaw and used it to cut 2" off each side so the screws were evenly spaced on my 32" door. It took a few minutes to cut each side, but it was fairly easy, although it was also easy to accidentally scratch the paint while cutting. I would suggest putting…