🔧 GEARWRENCH GearBox 12 Point XL Double Box Ratcheting Wrench, 10mm - Enhanced SEO Review

Bought to tighten cap screws on my truck. The wrench has a nice smooth but solid construction and can get into very hard to reach places.

Ideal for hard to reach places like a corner bolt on stabilizer bushings. There's room for 2-inch revs on a '97 Lexus ES300 or Camry.

This thing is a beast. What a lot of people don't realize is that you have to break the nut or bolt with the end of the box, not the end of the ratchet. Then the key will last a long time if used properly.

I work at a GMC dealership so obviously we have a lot of Yukons, Sierras etc and I couldn't find a better wrench to access the camber and roller bolts on the upper arms. This key easily turns a 45 minute job into a 15-20 minute job.

That might be enough for my needs. I really need a 16 inch 10mm. I've searched and read this list and all I've found is people saying it's 16.5 inches. So I thought this would be perfect. I wish people leaving comments like this would list the item in case more than one item gets confused with another like in this case. Either that or they sent me the wrong key, which is also possible. I prefer that it's the wrong key because it means I can still get a 16"10mm lol. But at least let me write a…

I have not used a spare key yet but I suspect the walls at the end of the belt are not thick enough to withstand the torque that may be encountered applied to keys of this length. Any strong torque can be enough to break the wall of the clutch end as shown on the first wrench I received in the condition it was already in.

I've had them for a couple of weeks I have to say AMAZING! In our store, a few people bought a set of these NO TOOL LOAD LINE long ratchet wrenches. I was adamant that one of my boys would use it when needed and they said AMAZING TOO! BIG leverage! YOU DON'T ALWAYS NEED THESE TOOLS FOR THE TRUCK. YES, some special items are required of them, but MOST ____

As well as all the other great automotive uses for this long wrench already listed by other reviewers, this tool is excellent for the 18mm bolts that hold the brake caliper bracket to the rear of an Audi (allroad in my case but many models are similar). When I received this wrench I was actually concerned that it was too long to roll well on the bike, but as it turned out I had plenty of room. However, the ratchet end is too thick to slide over the bottom bolts (and those bolts are difficult to