Header banner
Revain logoHome Page
lependor lifting stainless hardware shaped hardware logo

Lependor Lifting Stainless Hardware Shaped Hardware Review

6

·

Average

Revainrating 3 out of 5  
Rating 
3.0
🔩 Nails, Screws & Fasteners, 🔧 Hardware

View on AmazonView on ЯM

Media

(4)
img 1 attached to Lependor Lifting Stainless Hardware Shaped Hardware
img 2 attached to Lependor Lifting Stainless Hardware Shaped Hardware
img 3 attached to Lependor Lifting Stainless Hardware Shaped Hardware
img 4 attached to Lependor Lifting Stainless Hardware Shaped Hardware

Description of Lependor Lifting Stainless Hardware Shaped Hardware

Package Content: 6pcs x M10 Ring lifting Nuts. Ring inner diameter approx.25.58mm/1inch;Total Height :42mm/1.65"; Ring Thickness:8.6mm/0.34". The standard used by our Ring Shape Lifting Eye Nut is the Metric Units standard. Its specification is M10, The screw that needs to be matched also needs to be in metric units. M10 is basically equal to 3/8 inch, but it may not compatible with a standard 3/8 thread bolt. The thread are always the coarse thread. Material:Made of durable 304 stainless steel,durable,Corrosion resistant and antirust.It is of good bearing capacity. Precision thread and high polished surface.Easy To Install:Easy to use, ideal lifting equipments. Widely used in a variety of engineering lifting machinery, metallurgical and mining equipment, rail loading and unloading ports, forestry machinery, electrical equipment, etc.

Reviews

Global ratings 6
  • 5
    1
  • 4
    2
  • 3
    1
  • 2
    0
  • 1
    2

Type of review

Revainrating 3 out of 5

Metric Non-SAE Eye Nuts

is a metric m8 thread. It is not compatible with standard 5/16 threaded studs. Seller needs to remove 5/16 as it is confusing and irrelevant.

Pros
  • Decent Performance
Cons
  • Modern

Revainrating 4 out of 5

Great lifting eye best in nuts

Whilst this product is of excellent quality it is somewhat misleading as the description says it is 5/16 inch when in fact it is 8mm metric thread. Not interchangeable at all.

Pros
  • Everything is great!
Cons
  • Questionable purchase for the elderly

Revainrating 5 out of 5

Durable but not polished finish.

Used them to mount a temporary shower curtain to my ceiling and a fancy diagonally mounted sunken corner bath that we installed as a temporary shower while cleaning a fiberglass shower enclosure. When I'm done I use them again in the back of my truck for mounting.

Pros
  • Nicely packaged
Cons
  • Lots of stuff

Revainrating 4 out of 5

Incomplete package.

Pack of 10 M8 bags for copper specially designed to sell 9 bags M8 and 1 bag M6, one of the M8 parts, one of which differs from the other sizes, es un poco más alto , en cuanto a la calidad es excelente y llegó in 11 days después de pedirlo, espero le sirva la reseña, saludos!

Pros
  • Satisfied at the moment
Cons
  • Easy repairability

Revainrating 1 out of 5

It's metric, not (1:4 ")

I don't think you should mention 1/4" on this product! This is an M6 metric but is misleading as it is in brackets (1/4 inch). Instead, the metric should be in parentheses, (M6, metric), then there's no cheating! I got them to work by turning them out 1/4, but I wasn't too happy. I'll read the fine print next time!

Pros
  • Great for a small home
Cons
  • There are flaws

Revainrating 1 out of 5

In general, the ring is not bad, but NO thread was properly cut.

Not a bad ring Overall, but NOT ANY thread was cut properly, the standard M8 fastener will not insert into any of the rings. I had to cut the threads with a tap, some threads just need a little cleaning and others weren't cut deep enough. The pitch was correct, but the diameter was too small. I suspect their faucet was worn out and they just kept using it. They're great after the refurbishment, but the quality control at the factory was terrible. Nevertheless, I bought them twice because after…

Pros
  • Inspires confidence
Cons
  • Not fashionable