ONKRON Dual Monitor Mount 13"-32" D221E Review

I've been wanting to get one like this for a long time and here it is. Collected, installed, a bunch of emotions. How much more convenient it has become to work at a computer is indescribable! Monitors at eye level, no need to bend over, the neck no longer hurts. Freed up space on the table. In short, some pluses. I advise!

I have before this ONKRON G80 - it is better. Both in terms of design and ease of use. But on one monitor. Its pros: You can hang two monitors, hang norms. Even slightly different 23 and 27 hang fine Has cons: Bolts. Because someone obviously put the bolt. Look at the photo. ONKRON what is it? ! These are the main screws for attaching the rack! One turned into a rivet.

You can mount it to the wall or set it on a tabletop. The installation was simple, but after I hung the monitor, the mount started to drop it. I ended up tightening it too much, and it almost cracked, but now the screen is securely in place. After three months, there have been zero problems.

Holds confidently 2 monitors (32" and 27"), does not sag under weight, there is a cable channel and clips for cable management, the kit has everything you need to install and fix the monitors. Monitors can be customized in several planes (toward / away from you, up / down, portrait / landscape orientation)

Different pros: Set and forget. The bracket is very convenient, it costs 2 monitors. 1 - 27 diagonal, the second is old. Has some cons: It is rather inconvenient to tighten it with the keys that come with the kit. At least that's how it is for me. The table is right up against the wall. But it's already nitpicking

Otherwise, there are no problems - it holds 2 monitors 27 'diagonal. Copes with the main function - it frees up space under the monitors. Its pros: Ease of mounting, all adapters and different bolt options for mounting different models of monitors. Some cons: It is difficult to unwind if you need to remove one part. That didn't work out, unfortunately. I wanted to move the monitor closer to the wall, removing one "knee", but it did not work out.

Otherwise, there are no problems - it holds 2 monitors 27 'diagonal. Copes with the main function - it frees up space under the monitors. Different pros: Ease of mounting, all adapters and different bolt options for mounting different models of monitors. Cons below: It is difficult to unwind if you need to remove one part. That didn't work out, unfortunately. I wanted to move the monitor closer to the wall, removing one "knee", but it did not work out.

1. If your monitor weighs more than 5 kg, then this option will not work for you 2. When strengthening the vertical fixation, the bolts creak and almost burst. 3. A monitor weighing 5 kg simply cannot stand in a fixed vertical position and fall down, despite the fact that it was twisted as much as possible, again everything creaks as much as scary. I don’t want to say anything bad about the company, but this particular model failed, although many products of this company have problems with…

I am satisfied with the purchase, not 5 stars, since the feeling of small imperfections, but not affecting practicality in any way, I have been using it for about a month to the last table, it was fastened through the tabletop to the new one with a clamp, in both versions it holds tight

Installation is available both on the wall and on the table. The assembly was not difficult, but when I hung up the monitor, the mount began to lower it - I had to tighten it too tightly, at some point it even seemed that it would crack, but everything is in order. No complaints after 3 months of use.

As written in the instructions, it is better to assemble with two people. so far fixed only one mb monitor with 2 there will be shortcomings, while everything is ok

Definitely recommend to buy! Holds two 27-inch monitors confidently and without straining. It is advisable to determine the height before mounting the monitors, because it will be extremely difficult for one to raise / adjust both displays - almost impossible. Despite the fact that the fasteners "out of the box" are decently tightened, do not be too lazy to tighten a little more. It may seem that the structure is shaking, but this is due to the fragility of the table. On furniture with a wall…

Some pros: Reliable design; The mount is rigidly fixed on the table; Lots of nodes to adjust the position Got cons: It is not convenient to use the included tools before adjusting the screws. I used my screwdriver.

Has some pros: Easy to assemble, tool included, easy to change the position of the monitor, can be attached to different tables Got cons: The holder rides down the tripod if you change position and do not stick, even at maximum twist

Different pros: Holds securely, there are two options for attaching to the table, everything is included Cons: The level is off by an inch. Not critical, I'm used to it, but for perfectionists it will be a pain.

Got pros: Remove excess from the table, very strong hold, it is possible to insert into the hole in the table. Got cons: The monitors seem to hang differently, but maybe I just didn’t fix something.

With its pros: An affordable option to free up space on the table. Good equipment Cons below: Specifically, in the model with one clamp, there is no cable channel. To fix the tilt of the monitor, you need to make an effort

I took this bracket for two 27 '' monitors, I ran into a problem during installation due to my own fault - I did not foresee that the bracket could not be attached to my table because of the wall behind the table, I had to drill a hole in the table top. Further installation was not difficult. The main complaint about the bracket is that it is inconvenient to adjust the height, for this you need to unscrew the bolt with a key and raise or lower the structure that holds the monitors. For one…

Assembled easily while hanging 1 25" Dell U2520D, waiting for the second one for a full test! Having collected, I was afraid that the second one would not fit, but after measuring everything seems to be ok. After a couple of hours of use, I realized how convenient it is! Turn the monitor as you like, right class! Now, probably, there is still an adjustable table to take) There are no complaints about the quality, except that one little kotska was on the paint on the side that is not visible…

In general, a double impression. Awesome design, which can not be used due to incompleteness. Well, the design differences of the goods that arrived from the declared characteristics also play a not the best role. Got pros: The construction is pretty solid. Monitors have several degrees of freedom, you can twist it as you like. Well painted and looks solid. Has some cons: 1. The kit lacked a bunch of parts: caps, keys for mounting the entire structure, and most importantly, there were not…