🚙 Rough Country 2" Lift Kit (fits) 99-04 Jeep Grand Cherokee WJ 4WD - Enhanced Suspension System with N3 Shocks, Model: 69530 Review

If you are looking for a budget lift, nothing fancy and want to elevate your crawler tractor at the mall this should be your next purchase! I love the way he gave my WJ! However, no runner pads are included. Metal on metal so the beats in the noise are equal. Other than that, no complaints about this guy!

Everything about this lift is bullshit. I bought this lift 6 months ago and had to replace all the shock absorbers. Trust me when I say don't do a "cheap" elevator. Take some time and save up for something valuable. Even my rough country steering damper shot through. I will NEVER buy anything from a rough country again, ENTIRE waste of money my friends.

Not many decent options for a short climb - if you have decent tools (read spring compressors and electric or air drive) - I think you can do it in a few hours. Not bad. A REALLY big issue that others have pointed out is the noise from the rear pair. To eliminate this, you need a rubber gasket installed between the spring and the housing. I read the reviews and was ready - used some rubber strut washers I had (NOS) and solved the problem. Really very sad that Rough Country isn't spending $2 and

The kit arrived and I noticed that the rear shocks were missing the metal pieces that threw the bushings onto the shocks. I called support and they told me the kit should be exactly like this. Since the kit was actually missing parts, the shop charged me an additional fee to cut the required parts from my original shocks. I wish I had just received one of the other kits available. I lost $150 in Rough Country due to the mistakes of at least two people. The one who assembled the kit and the…

Yes it will work but a few things I didn't pay attention to. A spacer is mounted on the front spring. The seal is held to a one-piece body by a self-tapping screw that is too thin for the screw to be tightened. I removed the driver's side but took a larger diameter bolt and just put the bolt in. The other side has settled normally but only lightly planted. Ok, my fault on this one. just be careful Next comes the back lift. The spacer is installed from below here, but the bottom spring insulator