Header banner
Revain logoHome Page
highly accurate stronghero3d printing filament - 0.03mm precision logo

Highly Accurate Stronghero3D Printing Filament - 0.03mm Precision Review

3

·

Poor

Revainrating 2.5 out of 5  
Rating 
2.7
🖨️ 3D Printing Supplies, 🏭 Additive Manufacturing Products

View on AmazonView on ЯM

Media

(4)
img 1 attached to Highly Accurate Stronghero3D Printing Filament - 0.03mm Precision
img 2 attached to Highly Accurate Stronghero3D Printing Filament - 0.03mm Precision
img 3 attached to Highly Accurate Stronghero3D Printing Filament - 0.03mm Precision
img 4 attached to Highly Accurate Stronghero3D Printing Filament - 0.03mm Precision

Description of Highly Accurate Stronghero3D Printing Filament - 0.03mm Precision

Stronghero3D PETG filament 1.75mm black, most reasonable price,practical useful than PLA filament,good for plastic recycling system , better than go to biodegrade. Actually, there are no any dedicated compost degradation site, does it?. Same quality as other high price PETG,tough, easy to print. Printing Tips,a stiff hot bed is better and with PVP solid glue on ,first layer nozzle higher than PLA filament 1.75mm,print at low speed,suggest 25mm/s for infill,shells and support. PETG raw material from Korean SK 2012. If you find stringing occur ,lower temp(keep >220 degree),increase retraction length (suggest 4mm) . If You're not Completely Satisfied for Any Reason, Contact us and We'll Help You to Sent it Back and Refunded. Why do all sellers use the same raw materials but sell them at different prices? Low cost does not mean poor quality. Products are directly supplied from the factory, reducing the cost of intermediate channels and benefiting consumers .

Reviews

Global ratings 3
  • 5
    1
  • 4
    0
  • 3
    0
  • 2
    1
  • 1
    1

Type of review

Revainrating 1 out of 5

Inconsistency from party to party. I reject

I had a really bad experience with Stronghero3D PETg a while ago and decided to give it another try and to my surprise it worked very well. I ordered more spools and it prints very evenly and very cleanly. I still have 4 coils and 4 prints with the same settings I've been using for months: 75c bed, 255c nozzle, all good clean prints. These coils were dated May 2020. Looks like it was a move to PETg. It worked well for about a dozen coils. I was tight, I repeated the order, expecting the same…

Pros
  • Stronghero3D PETG filament 1.75mm black, the cheapest price, practically more useful than PLA filament, suitable for plastic recycling systems, better than biodegradable. In fact, there aren't any dedicated composting spots, are there?
Cons
  • Not as thick as other picks

Revainrating 2 out of 5

Unstable quality. Don't bet on a good roll.

The first roll of black PETG I bought from Revain arrived quickly and printed very well using Prusa Slicer 2.0's "Default PETG Settings". Thought I might have found a new budget PETG thread. After walking the first roll in just two days, I ordered a second roll (same order link, StrongHero Black PETG). That second throw was downright annoying. First, it doesn't print well at the standard 240C, lots of cold extrusion, poor layer adhesion and clogging. I ended up having to go down to 260c to get…

Pros
  • Why do all sellers use the same raw material but sell it at different prices? Low cost doesn't mean bad quality. The products are shipped directly from the factory, which reduces the cost of intermediate ways and benefits consumers.
Cons
  • Damaged

Revainrating 5 out of 5

You get what you pay for.

This is a tough review. On the one hand, it cost me $12 a roll, but on the other hand, there are problems. Overall, it's a lot better than I could have expected given the price. I just finished my first role and I have strong opinions. First, the color is great. Dark black with a beautiful sheen. Once set up properly, it prints very well with no real layer or layer adhesion issues. It's PETG, but after the set it doesn't stretch too much and a bridge is possible (though not very well, it's…

Pros
  • printing tips, hard hot bed is better, and with PVP hard glue, the first layer nozzle is higher than PLA 1.75mm filament, low speed printing, 25mm/s is recommended for filling, shells and support.
Cons
  • Expensive