TV bracket 17"-43" ONKRON M4S tilt-swivel, black Review

The stencil is slightly wrong (inaccuracy 1-2mm), so if you drill a wall, then mark by the mount itself. The bracket is sooooo cruel and massive, I didn’t even think that it would be like that, it looks completely different in the picture. Holds a 43-inch xiaomi mi tv p1 TV set (weight is about 7 kg), he doesn’t even feel it, so TV sets around 10 kg are no problem at all. I am very pleased with the purchase, I expected that the product would be worse, but in fact the analogues from the store…

I bought it for a vesa 75 x75 standard TV, but allegedly came m4s 100x100 and 200x200 WITHOUT 75x75! Brought to the installation site, opened holes under 75 no, THE PRODUCT DOES NOT MATCH! instead of m4s they sent np 28 in a box, visually even the product does not match the photos in the description! In general, this bracket is lying around. Now this bracket is like unnecessary junk! The box on which there is NO 75X75 mount on TV also does not match, I was not too lazy to go to the official…

Using small spacers, I corrected it for myself and now I am 100% satisfied! Has some pros Convenience, reliability and simplicity of design. Installed the bracket on the wall, hung the TV. The workmanship inspires peace of mind that the device will not fall! Different cons: After the start of use, I realized that the regular slope does not suit me, because. it is good for long-distance viewing, but I have a small distance in the room (I look lying down).

Nice bracket! Pros: Reliable, strong, clear mounting, the entire mounting kit is included With its cons: You can easily break a plastic element, 2 bolts on which the TV itself is attached to the bracket, do not look reliable, but they seem to hold

I bought a mount for the HP X27qc monitor, I had to put it on ebay, though I bought it quickly! For this monitor, the ONKRON NP15 bracket is ideal

Be sure to familiarize yourself with the performance characteristics of this bracket and compare it with the mass of the TV.

We use turns every day, very actively. There are no complaints. The only thing is that the mount did not quite fit the TV model, I had to redo it a bit. But this is not the fault of the manufacturer, but of the manager who assures that it will fit. Satisfied with the product!

Cool bracket, complete with several sizes of bolts, for attaching to the TV. There are also dowels for attaching to a concrete wall. The bracket itself is not flimsy, everything is reliable, I recommend

Liked in use. Doesn't wobble, holds position. The suspension is fixed with 2 bolts, with their help you can correct the horizontal angle of inclination. Pros below: Build quality, kit, there are even markings for drilling and Velcro for wires. Looks nice and secure. Has cons: I didn’t like that after the purchase it became 400r cheaper, the paint peels off from a slight impact, the bolt heads lick off a simple Soviet open-end wrench by 10

Despite the fact that the kit includes a set of dowels, I inserted my own dowels into the top 2 holes for mounting on the wall, more authentic, just in case. Quietly holds my not quite new and heavy 30-inch TV. And I turn it 90 degrees when I feel like it, and move it away from the wall for the entire length.

It is convenient to hang the bracket itself, everything is thought out. The TV is perfectly adjustable. The bracket fits perfectly! And at a great price. Thanks seller.

The Onkron brand, in my opinion, has established itself as an inexpensive, but high-quality solution for television equipment. Some pros: Good. Quality bracket. Thick metal). Two have already been purchased. Its cons: Not very good fastening dowels self-tapping screws to the wall. I used mine. But these are trifles.

Its pros: Heavy, strong. Seemingly reliable. Once installed, it is a little easier to control, but still almost does not bend in the center. Some cons: The instructions are of course not informative. The central plastic part is difficult to detach. To disconnect it, I had to break one mustache. No screws included for wall mounting.

A flawless fit was achieved after hanging the TV Fusion 28." A great bracket for the price, but it would be helpful to have a hardware store in the immediate area so you can run in and get some additional bolts. Included are extra-long bolts for securing the item to the wall (M8x70). Because the walls in newly constructed buildings are so paper-thin, I was forced to purchase M8x50. All things considered, a wonderful bracket for the cost. Always use brackets that have a margin when possible…

In general, it gives off an amazing appearance. The actual bracket itself weighs more than the television set. There are three bolts fastened at the top, and there are three bolts attached at the bottom, under the dowel number 10. In spite of the fact that there are three holes for fastening at the top, three holes at the bottom, and one hole in the middle, the kit only comes with four bolts. It is quite difficult to turn, and there is no way to make any adjustments to it. In this particular…

Some pros: Mounting kit for any mounting method and on any surface. Suitable for 43 inch TV Cons: Defects in the description. I had to look for parameters on other sites.

Different pros: Sturdy, stylish, good in a word, I'm satisfied using it for a month. Has some cons The bolts for screwing to the wall broke the weak ones immediately, replaced them with normal ones.

The bracket does its job well. In the parental home, I screwed it to a plank wall, hung a 32-inch TV on it - everything hangs securely, nothing dangles, moves, leans. Some reviews wrote that the TV dangles at the place where the VESA is attached to the bracket - if you insert the VESA into the groove accurately and correctly, then nothing dangles. I recommend. I am satisfied with the purchase.

The Onkron brand, in my opinion, has established itself as an inexpensive, but high-quality solution for television equipment.

Pros below: Sturdy, mechanisms do not stagger. I put 32 Samsung, with a large margin. In the presence of a rotary mechanism, a fairly small minimum distance from the TV to the wall. Has some cons There were no suitable bolts for attaching the plate to the TV in the kit. But, here I understand, all options are not foreseen.