Header banner
Revain logoHome Page
uniweld f36 co2 cylinder to ๐Ÿ’ก nitrogen regulator adapter: efficient solution for gas conversion logo

Uniweld F36 CO2 Cylinder to ๐Ÿ’ก Nitrogen Regulator Adapter: Efficient Solution for Gas Conversion Review

6

ยท

Very good

Revainrating 4 out of 5ย ย 
Ratingย 
4.0
๐Ÿ”จ Welding Tools, ๐Ÿ”ง Automotive Tools & Equipment

View on AmazonView on ะฏM

Media

(2)
img 1 attached to Uniweld F36 CO2 Cylinder to ๐Ÿ’ก Nitrogen Regulator Adapter: Efficient Solution for Gas Conversion
img 2 attached to Uniweld F36 CO2 Cylinder to ๐Ÿ’ก Nitrogen Regulator Adapter: Efficient Solution for Gas Conversion

Details

MaterialBrass
BrandUniweld
Item Dimensions LxWxH2 x 1.31 x 1.31 inches
Exterior FinishBrass

Description of Uniweld F36 CO2 Cylinder to ๐Ÿ’ก Nitrogen Regulator Adapter: Efficient Solution for Gas Conversion

Durable brass construction that is corrosion resistant. CO2 Cylinder (CGA320) to Nitrogen Regulator (CGA580) Adaptor. CGA is the Compressed Gas Association. CGA320 is the Cylinder Valve Connection for Carbon Dioxide. CGA580 is the Cylinder Valve Connection for Nitrogen, Argon and Helium.

Reviews

Global ratings 6
  • 5
    2
  • 4
    2
  • 3
    2
  • 2
    0
  • 1
    0

Type of review

Revainrating 3 out of 5

It turned. What else is there?

Works perfectly. I see that the o-ring will need to be replaced at some point after changing the bottle. CO2 makes my welder act like it's on steroids.

Pros
  • Welder
Cons
  • Almost never

Revainrating 4 out of 5

Works perfectly! in gas regulator

I used this for beer gas. Bought a nitro regulator but the tank was a CO2 connection (dad) so used this guy to pair it with a nitro regulator. Works for months with no leaks (use thread tape)

Pros
  • tools and household goods
Cons
  • frequency

Revainrating 5 out of 5

Shorter and stronger than my other adapter

Attention! The Uniweld F36 adapter does not use the same flat gasket (nylon O-ring) on the CO2 side as most Compressed Gas Association CGA 320 connectors. a Uniweld X09R O-ring instead.

Pros
  • Welding equipment and accessories
Cons
  • Almost everything in order

Revainrating 3 out of 5

Leaks but sealable

Adapter comes with tank o-ring. Although the O-ring fits snugly into the groove on the face of the CGA-320, it doesn't seal well, CO2 seeps through it like a Niagara. I solved the problem by adding a second larger o-ring. No leaks. I'm wondering if the adapter is for a different tank flange. Otherwise, the CGA-580 seals the sides well, there is nothing to complain about on this half. All threads have been cut cleanly, the adapter is of good quality.

Pros
  • Welding and soldering
Cons
  • No power

Revainrating 4 out of 5

Plan to replace o-ring before use

As many have said, the o-ring supplied is the wrong size which causes the connection on the CGA320 fitting to leak very quickly. Luckily I found a thicker o-ring to swap out for the one that came with it. The one I used was about 3mm thick. But I didn't measure. The problem is that there is a sealing groove in the valve fittings. The supplied o-ring will only work if the valve port is flat and without a groove. Plan to find the thickest o-ring that will fit in the adapter groove and it shouldโ€ฆ

Pros
  • Welder
Cons
  • Questionable purchase for the elderly

Revainrating 5 out of 5

Save a lot of nitrogen if you run an HVACR and have a draft beer setup.

I bought this to use CO2 with a Uniweld RHP400 Nitrogen Regulator in refrigeration systems, particularly when checking pressure and locating leaks. I usually use nitrogen which I can only get out of the tank for 1 or 2 small jobs as it is not liquid in the tank. I was tired of constantly running out of nitrogen and constantly paying for bottle replacements, so I decided to give CO2 a try. As you can see, I already have a large CO2 tank for my beer dispenser. The liquid CO2 tank runs **much**โ€ฆ

Pros
  • Tools and Household Goods
Cons
  • Doubtful