Wall Mount Bicycle Rack For Garage - Qualward Bike Hanger Cycling Pedal Storage Stand. Review

its a great way to hang your bike, horizontally vs. the traditional vertical. It also creates a cool ‘floating’ idea that the bike is being held by nothing on the wall! Perfect for my current situation and storage needs. Made my workroom / office / playroom THAT MUCH more fun! Great quality and once I trusted the laws of physics I saw what was the awesome balancing act that it does.NOTE: I was very disappointed in the anchors and the screws provided - I normally don’t use those when provided as

Sweet bike mounts. Pretty cheap too. Honestly kinda tough to measure out correctly for placement so be prepared to do some thinking, measuring and mapping out with your bike. That said, it doesn’t seem universal when it’s on the wall because every bike is different. So for example, because the geometry of my mountain bike is so much bigger, it could not fit on my mounts I put up for my road bike. Not the biggest issue and not the fault of the product. Definitely something to be aware of though.

The hardware itself is made of thick steel and I see it lasting for many years. The installation was a little tricky. The pedal mount piece is easy enough because you can mount it right to a stud but the tire rests are quite challenging since they often ended up being in a location where it was just drywall. *tip* mount a cross board for the tire hardware to connect to. (See picture)

The brackets themselves are pretty sturdy. The hardware that came with it is garbage. I went to the hardware store and bought better drywall anchors.I was hoping this would hold the bike a little closer to the wall. Unfortunately, the angle of the peddle bracket doesn’t allow me to hook all the way to the inside of the peddle. I have to hook it to the outside of the peddle which makes the bike lean out further from the wall than I would like. (See pictures)I also wish the wheel platforms were…

I was getting served ads for a very similar product that was going to cost 3x more and I couldn't justify that cost. These hangers handle my mountain bike and my wife's cruiser with ease. They allow for must easier mounting and unmounting from the wall and the angle at which they're hung creates a lot more space in the garage. I would definitely recommend.

I bought the 2-pack and 1-pack but the hangers from the 2-pack wasn't coated with rubberized material, the one from the 1-pack did though. The drywall anchors look cheap and the screws aren't great. Just use your own hardware. I use my own screws with washer and screw into stud.For the price, I can only give it a one star. You might want to consider other brand with better quality control and hardware.

These are well worth the money! Very easy to mount, very secure, super easy to use! This is the budget version, and they work great! The only issue I ran into is they are not drop bar or wide bar friendly if you plan on overlapping bikes. If you want to get 2 bikes off the floor, it should be fine, but 3 bikes on a 8' wall is kinda cramped. Would definitely recommend for cramped spaces! Mine is in my front room for a vintage race bike display.

This is a great way for me to keep my "regular" bike at the ready and within easy reach, while still keeping my other bikes at the ready--but not in the way. I am now storing five bikes where I used to keep three. The hardware itself is well made. The rubber coating on the pedal hook seems very tough and durable. The wheel trays are a little short, but they do the job well enough. The screws and drywall anchors are actually better than typical Chinese fasteners. By that I mean that they are…

Looked around and most bike wall hangers are expensive. I took a chance based on reviews and they worked out perfectly for the 3 bikes I needed to hang in the garage. One caveat. make sure the bike's handle bar does not hit the wheel of the bike that is hung above it. Even though I measured the exact distance between them and the top 2 bikes were fine, the last bike to hang on the bottom had a problem with the handle bar hitting the wheel of the bike above it. So measure twice, hang once. ;)

Excellent way to save space in garage and looks great too. If storing bikes on a wall you walk along, I might recommend mounting them at a height where you can walk under without hitting your head on the handlebars as they may stick out a bit. Installation is fairly straightforward, but not exactly a quick process. I mounted the pedal hooks to wall at studs, hung the bike and marked the wall where tires touched when bike sat level. I used quality drywall anchors for the tire platforms as most…

I absolutely LOVE this concept. You can overlap you hikes and create more space. I wish the bottom pieces were a little wider. But again, the concept is fantastic. I am ashamed I was hanging them the old way for so long.CAUTION. Do NOT use the supplied screws. Go to Home Depot or Lowe’s and get some 2 in or 3 inch black wood screw to get deep into the studs.The fact that the stud holes are up and down instead of beside each other is why I chose these!

Ended up working out great. But it took a couple of modifications to get it there. First, the screws and wall anchors included weren't good. Anchors were too big and pulled thru sheetrock and screws are too thin. So I got bigger screws and better wall anchors and decided to put bead board on the wall to make it easy to keep clean.The large/left bike main bike hanger is in a stud and solid. I just used the front tire support because I was able to line it up with a stud as well. The rear tire…

The benefit of this brand over others is that the pedal holders allow for two screws to be installed vertically - this way both can be put in a stud - whereas others have the screw holes side by side which makes installing both in studs very difficult.The downside of this unit is with the wheel shelves. They are so narrow that if makes it difficult to actually place them such that the wheels don't rub against the wall - it's very finicky.

The pedal mounts I received are not rubber coated like the description says they are. Just black metal. Very frustrating that the item doesn’t match the description of what I paid for so I will be returning these and searching for another brand.

I like this system because the bike takes up less space than a system that has the bike coming straight off the wall. In my case, I am able to hang one bike above another in the garage. Easy enough for both kids to pull their bikes down. One complaint. no directions were included in my package. or I wouldld have given the product 5 stars.

This product is so easy to use and super convenient. ‎1. Install isn’t a piece of cake but it’s not that hard. Super sturdy.

If you don’t have a lot of space, buy this rack. That's my feedback. Easy to install and take bike on and off. The Price can’t be beaten.

There was a nice rubber coating on the end of the wall mount when I first ordered this, but the next order a few months later and it no longer has the coating sadly, so be careful with carbon cranks!

Works as described. Might be better if they provide a more detailed instructions. If you put the wheel support in the middle, the wheel starts to turn and might rub on the wall. And just like the reviews says, get a better drywall mount and screws. But it works! Holds my bike well!

One of the reasons I purchased this one was because the hook are advertised as rubber coated and they are not, they are just powder coated or painted metal.